Carbon & Alloy Steel Suppliers & Grades
Structural, cold-finished, and chromoly alloy steels including A36, A572 Gr 50, A500, DOM, 1018, 1045, 12L14, 1144, 4130, 4140, 4340, 8620, and 52100.
Carbon and alloy steel looks like one market from the outside, but US inventory splits across three different warehouse types: structural/flat-rolled yards (A36, A572, A992 beams, A500 HSS), mechanical bar & tubing houses (1018, 12L14, 4140, DOM), and heavy plate processors (A516, AR400, A514).
Carbon & Alloy Steel Grades & Trade Names
.15 C MAX
Live pricesA chemistry-based specification for low-carbon steel with a maximum of 0.15% carbon. This isn't an AISI grade but a buyer's spec that ensures the material is soft enough for forming, welding, or carburizing applications. What you actually get could be anything from 1008 to 1015 depending on the heat. Common on purchase orders for sheet, strip, and tubing where the customer just needs 'something soft and weldable' without specifying a particular grade. Compare to 1010 (similar carbon range with defined chemistry) and CS-B (another generic soft steel spec).
11L17
Live pricesLeaded version of 1117. Adds lead on top of the manganese and sulfur for even better machinability while retaining the ability to be carburized. Best of both worlds for high-volume screw machine production of case-hardened parts. Same limitations as all leaded steels. If your application needs easy machining, case hardening, and high volume, this is the material. Being phased out of some specs due to lead content. Compare to 1117 (same but without lead) and 12L14 (better machinability but no case-hardening ability).
12L14
Live pricesThe best-machining carbon steel, period. Lead and sulfur additives make chips break into short, clean fragments instead of the rat's nests you get with 1018. Machinability is rated around 190% on the standard scale versus 78% for 1018. You can run it fast, tools last forever, and surface finish is beautiful with minimal effort. Screw machine shops love this stuff. The tradeoffs are real though: it can't be welded (the lead ruins the weld), it rusts significantly faster than 1018, and some automotive OEMs have pulled it from specs due to lead content concerns. Also slightly weaker than 1018. If the part gets machined and doesn't need welding, 12L14 saves serious cycle time and tooling cost. Compare to 1018 (weldable but much harder to machine), 1215 (lead-free alternative, almost as good), and 1144 (stronger with decent machinability).
15N20
Live pricesA nickel-bearing steel (0.75% C, 2% Ni) used almost exclusively in pattern-welded (Damascus) knife blades. The nickel provides bright contrast against high-carbon layers when etched. Not a standard industrial grade. If you see it in a shop, someone is making Damascus billets. Compare to 1075 (similar carbon content, no nickel) and L6 tool steel (also nickel-bearing, used for similar laminate applications).
26C3
Live pricesA French-origin high-carbon steel (1.05% C, 0.35% Mn) used by bladesmiths and toolmakers. Similar to AISI 1095 but with tighter chemistry controls and lower manganese. Produces very fine-grained steel when properly heat treated, resulting in excellent edge geometry for blades. Not a standard industrial or structural grade. Compare to 1095 (similar carbon, more available in the US) and W1 tool steel (similar carbon range with broader industrial use).
41L40
Sourcing guideLeaded 4140. The 'L' means lead has been added (typically 0.15-0.35%) to improve machinability, same concept as 12L14 vs 1018. Chips break cleaner, tools last longer, and surface finish improves. The tradeoff is the same as always with leaded steels: reduced weldability and environmental/health concerns. Some OEMs have pulled leaded grades from specs. If your shop runs high-volume 4140 parts and doesn't need to weld them, 41L40 can save real cycle time and tooling cost. Availability is tighter than standard 4140. Compare to 4140 (standard grade, weldable) and ETD-150 (pre-hardened with enhanced machinability, different approach to the same problem).
41L40/41L42
Sourcing guideLeaded 4140/4142 range. Same as 41L40 but with the carbon range extended slightly higher (up to 0.42%). Dual-designation means the distributor is stocking material that could fall anywhere in the 0.40-0.42% carbon range with lead added. Functionally identical to 41L40 for most machining purposes. See 41L40 for details on properties and tradeoffs.
44W
Live pricesCanadian structural steel grade per CSA G40.21. 44W means 44 KSI (300 MPa) minimum tensile strength, weldable. The Canadian equivalent of A36. If you're buying from a Canadian mill or for a Canadian project, this is what gets specified. Same material in practice. Compare to A36 (US equivalent) and 50W (higher strength Canadian grade).
80CRV2
Live pricesA European spring and blade steel (0.80% C, 0.50% Cr, 0.20% V). The chromium and vanadium additions improve hardenability and grain refinement over plain 1080 carbon steel. Popular with bladesmiths for large choppers and camp knives because the alloy additions improve toughness at high hardness. Heat treats to HRC 59-62. Machine annealed. Not a standard US industrial grade. Compare to 1084 (simpler heat treat, no alloy additions) and 5160 (more chromium, the US spring steel equivalent).
86L20
Live pricesLeaded 8620. Lead added to improve machinability for high-volume production of carburizing parts like gears and pins. Same case-hardening properties as 8620 after carburizing, but faster to machine and better chip control in the soft state before heat treatment. Same caveats as all leaded steels: can't weld it, environmental concerns, some specs prohibit it. If you're running thousands of gear blanks on a screw machine or CNC lathe, the cycle time savings are significant. Compare to 8620 (standard grade, weldable) and 8620H (hardenability-guaranteed version).
300M
Sourcing guideSilicon-modified 4340 vacuum-melted aerospace alloy steel (AMS 6417 / AMS 6419). Adding ~1.6% silicon and vanadium suppresses tempering embrittlement so parts can be heat-treated to 280 – 305 KSI tensile with high fracture toughness. Standard for commercial and military aircraft landing gear, flap tracks, and high-shock airframe pins.
1006/1010
Sourcing guideCovers the very low end of the carbon range (0.06-0.10%). Ultra-soft, ultra-formable. Deep drawing stock. See 1008 and 1010 for details.
1008
Live pricesVery low carbon steel (0.08%), almost exclusively a sheet, strip, and wire product. Extremely formable and ductile. Meant for deep drawing, stamping, and cold heading, not machining. If it ends up in your lathe, expect gummy, stringy chips and poor surface finish. The material deforms instead of shearing cleanly. Used for sheet metal enclosures, cold-headed fasteners, wire products, and any stamped part where formability is the priority. Compare to 1010 (slightly more carbon, similar applications), 1018 (actual machining stock), and CS-B (similar softness without defined chemistry).
1008/1010
Sourcing guideThe softest, most formable carbon steels you'll commonly find. Very low carbon (0.08-0.10%) makes them extremely ductile and easy to bend, stamp, and draw. This is sheet metal and wire stock, not typical machining material. If you do put it in a lathe or mill, expect it to be gummy as hell. The material wants to deform rather than shear, so you get long, stringy chips, built-up edge on the tool, and poor surface finish. You need very sharp tools, positive rake, and aggressive feed to get anywhere. Used for deep drawn parts, cold headed fasteners, and wire products where formability matters more than strength. Compare to 1018 (stronger, machines much better, the right choice for any actual machining work) and A36 (structural grade that's similarly soft but more variable in chemistry).
1010
Live pricesLow-carbon steel (0.10%) with slightly more strength and hardness than 1008 but still firmly in the 'formability first' category. Common in sheet, strip, tubing, and wire. Can be case-hardened (carburized) for a hard surface on a soft core, which gives it a niche in small parts production. Still gummy and difficult to get a good finish on in a lathe or mill. Welds easily. Used for cold-formed parts, light structural tubing, and anywhere you need a cheap, formable steel with known chemistry. Compare to 1008 (softer, more formable) and 1018 (better machinability, the right choice for any real machining work).
1010/1015
Sourcing guideDual-designation covering the 0.10-0.15% carbon range. Bridges the gap between the soft forming grades and the low end of machining stock. Suitable for light structural applications, cold-formed tubing, and parts that need a bit more strength than pure 1008/1010 without going all the way to 1018. Not commonly specified for precision machining.
1018
Live pricesThe default mild steel for machine shops. If someone says 'cold rolled steel' without specifying a grade, it's probably 1018. Good machinability, easy to weld, takes case hardening well. The main complaint is chip control. It's gummy enough to produce long stringy chips that bird's-nest around your tooling. Use a chipbreaker or bump up the feed. Cold drawn 1018 gives you tighter tolerances and a better surface finish off the bar than hot rolled, but it has internal stresses that can cause warping if you machine heavily from one side. Quality varies by supplier. Compare to 12L14 (dramatically easier to machine but can't weld it), A36 (cheaper and fine for structural work but worse surface finish and less consistent chemistry), and 1045 (stronger but harder to machine when you need more carbon).
1020
Live pricesNearly identical to 1018 in practice. The carbon spec ranges actually overlap (1018 is 0.15-0.20%, 1020 is 0.17-0.23%), so depending on the heat you might not be able to tell them apart. 1018 has slightly higher manganese which offsets the lower carbon, making their mechanical properties essentially the same in cold drawn form. The real difference is availability and form. 1018 dominates in bar stock for machining. 1020 shows up more often in DOM tubing and turned/polished bar. If a drawing calls for 1020 and you can only get 1018, it's almost always a safe substitution for non-critical applications. Machines the same as 1018 with the same gummy chip behavior. Both weld easily. Compare to 1018 (more available in machining stock) and 1026 (slightly stronger, the usual tubing grade).
1026
Live pricesThe tubing steel. Most hot-formed mechanical tubing is 1026. Slightly more carbon than 1018/1020 (0.22-0.28%) which gives it a bump in strength without making it significantly harder to machine. In practice, machinists describe it as almost indistinguishable from 1018 or 1020 at the lathe. Chips slightly cleaner than 1018 due to the higher carbon, but the difference is marginal. Welds fine. The main reason you'll encounter 1026 is because the tubing you bought happens to be made from it. If you're buying bar stock for machining, you'll almost never spec 1026 over 1018 since 1018 is more available and cheaper in bar form. Compare to 1020 (slightly weaker, common substitute) and 1018 (the go-to for bar stock).
1040
Sourcing guideMedium-carbon steel (0.40% C) sitting just below 1045. Good strength and toughness in hot-rolled or cold-drawn bar for couplings, crankshafts, tie rods, and forged machine parts where full alloy hardenability isn't needed. Machines cleanly annealed and responds to induction hardening, though 1045 is far more widely carried by US service centers.
1045
Live pricesMedium carbon steel. This is where you step up from mild steel territory. 0.45% carbon gives it significantly more strength and hardness than 1018, and it can be through-hardened (unlike 1018 which can only be case hardened). Machines noticeably better than 1018 because the higher carbon content produces shorter, cleaner chips that break instead of forming bird's nests. Feels more like cutting real steel instead of fighting taffy. The tradeoff is weldability. You can weld 1045, but it needs preheat and careful technique to avoid cracking in the heat-affected zone. Common for shafts, gears, bolts, and any part that needs moderate strength without going to an alloy steel. Can heat treat to roughly 50-55 HRC. Compare to 4140 (stronger, more hardenable, but more expensive) and 1018 (weaker but easier to weld and cheaper).
1045/1050
Sourcing guideDual-designation for medium-carbon steel in the 0.45-0.50% range. Either grade provides good strength and hardness with through-hardening capability. If a supplier stocks this dual-cert material, the heat fell somewhere in the overlap range. Both machine similarly, with cleaner chips than mild steel. Both can be induction or flame hardened. Compare to 1045 (lower end, easier to weld) and 4140 (alloy steel, better hardenability in thick sections).
1050
Live pricesMedium-carbon steel with 0.50% carbon. Slightly stronger and harder than 1045, with the same through-hardening capability. Higher carbon means slightly better wear resistance but reduced weldability and toughness compared to 1045. Used for springs, shafts, and parts that need to be harder than what 1045 provides. Machines well in the annealed condition with good chip breaking. Can reach HRC 55-58 with proper heat treatment. Compare to 1045 (slightly softer, easier to weld, more forgiving) and 4150 (alloy version with deeper hardenability).
1075
Live pricesHigh-carbon steel (0.75% carbon). Spring steel territory. Can be hardened to HRC 55-60 with good edge retention and spring properties. Harder to machine than medium-carbon grades and requires preheat for any welding. Used for springs, agricultural blades, hand tools, and wear parts. Machines best in the annealed or spheroidized condition. Compare to 1095 (even higher carbon, harder, more brittle) and 1045 (lower carbon, easier to weld, less hardenable).
1080
Sourcing guideHigh-carbon eutectoid spring and blade steel (~0.80% C). Hardens cleanly to HRC 58 – 62 for flat springs, agricultural wear blades, and hand tools without hyper-eutectoid brittleness. Machine in spheroidized-annealed condition before heat treat.
1084
Live pricesHigh-carbon steel (0.84% carbon). A knifemaker's favorite because it hits a sweet spot between hardness, toughness, and simplicity of heat treatment. Hardens to HRC 60-62 with a simple water or oil quench and doesn't need exotic heat treat procedures. More forgiving than 1095. Used for blades, cutting tools, punches, and high-wear components. Machine annealed, then heat treat. Compare to 1095 (slightly harder, more brittle) and 1075 (slightly softer, tougher).
1095
Live pricesHigh-carbon steel (0.95% carbon). The classic spring and blade steel. Maximum hardness (HRC 62-65) among the plain carbon steels but brittle if not tempered properly. This is leaf spring, hand saw blade, and knife blade material. Machine only in the annealed or spheroidized condition. After hardening, it's grinding only. Very poor weldability. Compare to 1084 (slightly lower carbon, more forgiving to heat treat) and W1 tool steel (similar carbon content but with better manufacturing controls).
1117
Live pricesFree-machining manganese steel. Higher manganese (1.00-1.30%) and moderate sulfur content give it good machinability without lead. Not as free-cutting as 12L14 or 1215, but meaningfully better than 1018. The real advantage is that 1117 can be carburized for case hardening, giving you a free-machining steel that also takes a hard case. This makes it useful for high-volume parts that need both easy machining and surface hardness, like small gears, pins, and bushings. Available in both leaded (11L17) and non-leaded versions. Welds better than the 12xx series due to lower sulfur. Compare to 1215 (better machinability but can't case-harden), 12L14 (best machinability but leaded and no case-hardening), and 8620 (better case-hardening properties but harder to machine).
1141
Live pricesMedium-carbon resulfurized steel. Sits between the free-machining 11xx grades and the plain carbon 10xx grades. The 0.40% carbon gives it more strength than 1117 or 1215, while the sulfur addition improves machinability over plain 1045. Can be induction hardened for surface hardness applications. Used for parts that need moderate strength and decent machinability without going to an alloy steel. Think medium-duty shafts, studs, and pins where 1018 is too soft and 4140 is overkill. Compare to 1144 (slightly more carbon, higher strength, the Stressproof base) and 1045 (plain carbon, no sulfur, tougher but gummier to machine).
1144
Live pricesResulfurized medium-carbon steel, the base alloy for Stressproof. As plain 1144, it machines significantly better than 1018 or 1045. Sulfur creates manganese sulfide inclusions that break chips and reduce built-up edge. Rated around HRC 20 as-supplied. Stronger than mild steel (about 100-115 KSI tensile) without needing heat treatment. Good for shafts, pins, and tooling where you want easy machining and decent strength. Note: plain 1144 is not the same as Stressproof, which is a branded product with proprietary elevated-temperature drawing. Plain 1144 may not hold size as well or have the same low residual stress. Can't weld it reliably. Rusts faster than 1018 due to the sulfur. Compare to 4140 pre-hard (stronger, harder to machine) and 12L14 (easier to machine but much weaker).
1144 A311 CL-B
Live prices1144 steel manufactured to ASTM A311 Class B specification. This is the formal spec that covers stress-relieved, cold-drawn carbon steel bars with guaranteed minimum mechanical properties (115 KSI tensile, 100 KSI yield for Class B). This is what you're actually getting when someone says 'Stressproof' generically. The A311 process produces bars with very low residual stress, so parts don't warp when you machine asymmetric features like keyways or flats. Machines like a dream. Machinists describe it as 4140 pre-hard strength with 12L14-like machinability. Only available in round bar due to the drawing process. Not weldable. Compare to plain 1144 (same chemistry, less stress relief, cheaper), ETD-150 (higher strength, same concept), and 4140 pre-hard (stronger but harder to machine and will move on you).
1144 CENTURY
Sourcing guideCentury is a brand name for 1144 stress-relieved steel, similar to Stressproof but from a different manufacturer. Same concept: 1144 base chemistry processed through elevated-temperature drawing for low residual stress, good machinability, and consistent mechanical properties. If your supplier stocks Century instead of Stressproof, the properties should be comparable. Always verify the spec meets A311 Class B or whatever your drawing requires. Compare to 1144 A311 CL-B (the generic specification) and Stressproof (the most well-known brand name).
1215
Live pricesThe lead-free alternative to 12L14. Resulfurized and rephosphorized for free-machining properties, rated around 136% machinability on the C1212 baseline. Not quite as butter-smooth as 12L14 (which rates 190%), but close enough for most screw machine work without the lead content headaches. Chips break well, good surface finish, reasonable tool life. Slightly stronger than 12L14 in some specs. Same limitations: poor weldability due to the sulfur, and it will rust faster than 1018. Often a few cents per pound cheaper than 12L14. If your customer's drawing changed from 12L14 to eliminate lead, 1215 is usually the first alternative. Compare to 12L14 (better machinability but leaded) and 1117 (free-machining with better weldability).
4130
Live pricesThe weldable chromoly. Same chromium-molybdenum family as 4140 but with 0.30% carbon instead of 0.40%. That lower carbon makes a real difference in weldability and ductility while still giving good strength after heat treatment. This is the aerospace tube and race car chassis steel. 4130 tube is everywhere in aircraft frames, roll cages, and structural fabrication where you need to weld chromoly and trust the joint. Machines well in the annealed condition. Not as strong as 4140 when heat treated because of the lower carbon, so if you're making a shaft or gear that needs maximum hardness, go with 4140 or 4340. But if the part gets welded, 4130 is almost always the better choice. Compare to 4140 (stronger but harder to weld) and 1045 (cheaper, similar strength range but no alloy content for hardenability in thick sections).
4140
Live pricesThe workhorse alloy steel. Chromium-molybdenum with 0.40% carbon gives you excellent strength, toughness, and wear resistance through a wide range of heat treatments. Available annealed, normalized, or pre-hardened (Q&T to 28-32 HRC). Pre-hardened 4140 machines well with carbide at moderate speeds. Don't dwell or take light cuts. It will work-harden if you rub instead of cut, so keep the feed up (0.006-0.010 IPR minimum) and maintain a productive depth of cut. Chips break cleanly. Weldable with preheat and proper procedure, but it's not casual. The 4140 you buy at the distributor is not all the same. 'Pre-hard' is vague. Ask for the actual hardness and MTRs. Compare to 4340 (stronger, tougher, more expensive), 1045 (cheaper but less hardenable), 8620 (case-hardening steel, different use case), and ETD-150 (pre-hardened alternative that skips heat treat).
4140H
Live prices4140 with guaranteed hardenability band. Same relationship to 4140 as 4340H has to 4340. The 'H' designation means the steel meets a Jominy hardenability range per ASTM A304, giving engineers confidence that heat treatment will produce predictable results across different heats of steel. In practice, most 4140 from reputable mills will meet the H band anyway, but the certification matters for aerospace, oil and gas, and any application with a formal material spec. If your customer's drawing says 4140H, don't substitute standard 4140 without approval. Machines identically to regular 4140. Compare to 4140 (same material, less guaranteed hardenability) and 4340H (when you need more toughness or thicker section hardenability).
4142
Live pricesChromium-molybdenum alloy steel with 0.42% carbon. Sits right between 4140 (0.40% C) and 4145 (0.45% C). In practice, most machinists can't tell it apart from 4140 at the lathe. Same heat treatment response, same machinability, same applications. Often shows up when a distributor stocks material that falls in the overlap between 4140 and 4145 specs. Compare to 4140 (functionally identical for most purposes) and 4150 (higher carbon, higher hardness capability).
4145M
Sourcing guideModified 4145, typically with adjusted sulfur or other minor chemistry tweaks for specific oil and gas applications. The 'M' usually indicates a modification to improve machinability or meet a particular API specification for downhole tools, drill collars, or couplings. Chemistry falls between 4140 and 4150 with about 0.45% carbon. Often supplied Q&T to specific hardness ranges dictated by NACE or API standards for sour service (hydrogen sulfide environments). If you're machining it, treat it like 4140 pre-hard but slightly tougher. Compare to 4140 (standard grade, slightly softer) and 4150 (higher carbon without the 'modified' oil field tweaks).
4150
Live prices4140's stronger sibling. Same chromium-molybdenum alloy system but with 0.50% carbon instead of 0.40%. The extra carbon gives higher achievable hardness (up to HRC 55+ vs 50-55 for 4140) and better wear resistance, but at the cost of reduced toughness, ductility, and weldability. Used for parts that need to be harder than what 4140 can deliver: heavy-duty gears, high-strength shafts, and tooling. More difficult to machine than 4140, especially in the hardened condition. Needs careful heat treatment to avoid cracking. If you're specifying 4150, make sure you actually need the extra hardness. Most applications are fine with 4140 at the right temper. Compare to 4140 (tougher, easier to work with, usually sufficient) and ETD-150 (which is essentially elevated-temperature-drawn 4150 chemistry).
4320
Sourcing guideNickel-chromium-molybdenum carburizing steel (0.20% C, 1.8% Ni). Delivers higher core toughness and shock resistance after case hardening than 8620, without the cost of aerospace 9310. Used for heavy-duty pinions, rock-bit cones, and industrial transmission gears.
4330
Live pricesA nickel-chromium-molybdenum alloy steel with 0.30% carbon. Lower carbon than 4340 gives better weldability and toughness at the expense of some ultimate hardness. Used for aircraft structural components, oil field tools, and heavy-duty forgings where impact resistance and weldability matter more than maximum hardness. Machines similar to 4340. Often specified in the vacuum-melted version (4330V). Compare to 4340 (higher carbon, stronger, less weldable) and 4130 (even lower carbon, best weldability in the 41xx/43xx family).
4330V
Sourcing guideVacuum-melted aerospace steel with vanadium. A modified version of 4330 (which is itself a lower-carbon cousin of 4340) with vanadium added for grain refinement and improved toughness. The vacuum melting process (VAR or VIM-VAR) removes dissolved gases and non-metallic inclusions, producing a cleaner steel with better fatigue life and more consistent mechanical properties. This is serious aerospace and oil field material. Used for airframe components, landing gear, drill jars, and high-strength bolting where failure is not an option. Lower carbon than 4340 (around 0.30%) gives better weldability and toughness at the expense of some ultimate hardness. Expensive and typically requires certified MTRs, magnetic particle inspection, and strict process control. Compare to 4340 (higher strength, cheaper, air-melted standard) and 300M (even higher strength 4340 modification).
4340
Live pricesWhen 4140 isn't strong enough. The addition of 1.65-2.00% nickel on top of the chromium and molybdenum gives 4340 significantly better toughness, impact resistance, and hardenability, especially in thick cross-sections. This is aircraft landing gear steel, heavy-duty crankshaft steel, drill collar steel. At the same hardness as 4140, the two have similar tensile strength, but 4340 retains far more toughness and fracture resistance. The nickel makes it through-harden more uniformly in large sections where 4140 would go soft in the core. Harder to machine than 4140 (about 55-60% machinability vs 65% for 4140). Costs roughly double. Use 4340 when you need the toughness or the section size demands it. Otherwise 4140 does the job for less money. Compare to 4140 (cheaper, easier to machine, adequate for smaller sections) and 4330V (vacuum-melt aerospace variant).
4340H
Live prices4340 with guaranteed hardenability band per ASTM A304. The 'H' suffix means the steel was tested to a Jominy end-quench specification, so you know the hardness at specific depths from the quenched end. Same chemistry as 4340 but with tighter controls. Matters when your heat treater needs to hit a specific hardness profile in a thick section and can't afford to get a bad heat that falls outside the hardenability range. If your drawing calls out 4340H, it's because the engineer wanted assurance the part would harden predictably. Machines the same as standard 4340. The premium is small and mostly about paperwork and certification. Compare to 4340 (same steel, less guaranteed hardenability) and 4140H (same concept for the 4140 family).
5160
Sourcing guideChromium spring steel (0.60% C, 0.80% Cr). The workhorse heavy leaf-spring, torsion-bar, and impact-blade steel in North America. Deep oil-hardening toughness at HRC 52 – 58 lets thick sections flex repeatedly without fatigue cracking. Supplied primarily as hot-rolled flat bar and round bar.
6150
Sourcing guideChromium-vanadium spring and shaft alloy steel (0.50% C, 0.95% Cr, 0.15% V). Vanadium refines the grain structure for superior shock, fatigue, and abrasion resistance at HRC 48 – 56. Common in machine-tool arbors, collets, hydraulic rams, gears, and hand tools.
8620
Live pricesThe gear steel. Low-carbon (0.20%) nickel-chromium-molybdenum alloy designed specifically for carburizing. You machine it soft in the annealed condition (easier than 4140, nice finish, reasonable tool life), then send it out for carburizing to get a hard, wear-resistant surface (HRC 58-62) over a tough, ductile core. This hard-shell/soft-core combination is exactly what gears, pins, camshafts, and bearing races need. It's the original and still most common case-hardening steel. Welds better than 4140 due to lower carbon. Cheap because automotive OEMs buy mountains of it. The catch: once carburized, it's extremely hard to machine, so finish all your features before heat treatment. Compare to 4140 (through-hardening, no case, stronger overall), 9310 (deeper case hardening for high-performance gearboxes), and 8620H (guaranteed hardenability version).
8620H
Live prices8620 with guaranteed hardenability band. Same carburizing steel as 8620 but manufactured to meet a Jominy hardenability range per ASTM A304. This matters for gears and drivetrain components where the engineer needs to guarantee a specific case depth and core hardness after carburizing. If the drawing calls out 8620H, the heat treater has tighter parameters to work with and more confidence in the outcome. Functionally machines the same as standard 8620 in the annealed condition. The premium is for the testing and certification. Compare to 8620 (same steel, less guaranteed hardenability) and 86L20 (leaded version for better machinability).
9310
Live pricesNickel-chromium-molybdenum case-hardening steel. The premium gear steel for aerospace and high-performance applications. Carburizes to a deeper, more uniform case than 8620 with better core toughness after heat treatment. Used in aircraft transmission gears, helicopter main rotor gears, and any gear set where failure means lives at risk. More expensive than 8620 and requires more precise heat treatment. Machines well in the annealed condition. Compare to 8620 (cheaper, adequate for most industrial gears) and 4320 (intermediate performance between 8620 and 9310).
52100
Live pricesThe bearing steel. 1% carbon, 1.5% chromium. This is what ball bearings and roller bearings are made from. Heat treats to HRC 60-64 with exceptional wear resistance and fatigue life when properly processed. In the annealed condition (spheroidized) it machines well with carbide tooling. After hardening, it's grinding and honing only. Also popular in the knifemaking world for its fine grain and excellent edge retention. Compare to 440C stainless (similar hardness with corrosion resistance) and M2 HSS tool steel (even harder but overkill for bearing applications).
A36
Live pricesThe cheapest structural steel. A36 is specified by its mechanical properties (36,000 PSI minimum yield strength), not its chemistry, which means the carbon content can vary batch to batch. This inconsistency is fine for building bridges and I-beams but annoying if you're trying to machine it. Hot rolled A36 has mill scale, rough dimensions, and lower precision than cold drawn bar. It's harder to machine than 1018. It's not terrible, but it requires more power and you'll burn through inserts faster. Buy A36 when you need structural shapes (angles, channels, beams, plate) or when cost matters more than machinability. Buy 1018 when you need to actually machine the part. A common mistake is specifying A36 on a drawing that needs machining. Compare to 1018 (better for machining, tighter chemistry, costs more) and A36/GR50 (higher yield strength for structural applications).
A36/GR50
Sourcing guideDual-certified structural steel that meets both ASTM A36 and A572 Grade 50 specifications. Grade 50 bumps the minimum yield strength from 36,000 PSI to 50,000 PSI, giving you stronger structural members without changing material suppliers. Most modern domestic mills roll their structural shapes to meet both specs simultaneously, so this is what you actually get when you order A36 from many distributors. The higher strength comes from slightly more manganese and sometimes micro-alloying with vanadium or niobium. Machines about the same as straight A36. Still hot rolled with mill scale and similar inconsistencies in chemistry. Used for the same structural applications as A36 but allows engineers to design lighter sections. Compare to A36 (lower guaranteed yield, same material in practice) and 1018 (better for machining but not a structural specification).
A53 Pipe
Live pricesASTM A53 covers welded and seamless black and hot-dipped galvanized steel pipe. This is standard plumbing and gas piping, not tubing. Type E is electric-resistance welded, Type S is seamless. Grade B (35 KSI yield) is the most common. Used for plumbing, fire sprinkler systems, gas distribution, and low-pressure process piping. Not a machining material. Compare to A106 (higher temperature/pressure pipe) and A500 (structural tube, not pipe).
A105
Sourcing guideASTM A105 forged carbon steel specification (~0.25 – 0.35% C, silicon-killed) for ambient and elevated-temperature pressure piping flanges, valve bodies, and forged rounds. Machines much like normalized 1026 or 1030 steel; buyers usually require ASME/ASTM heat-traceable MTRs.
A106 Seamless Pipe
Sourcing guideASTM A106 (typically Grade B) seamless carbon steel pressure pipe for high-temperature steam, refinery, and process service. Unlike welded A53 pipe, A106 is 100% seamless and silicon-killed for bending, flanging, and code pressure welding.
A193 B7
Live pricesASTM A193 covers alloy and stainless steel bolting for high-temperature and high-pressure service. The most common grade is B7 (4140/4142 chromoly, quenched and tempered). This isn't a material specification. It's a fastener specification that defines required mechanical properties, heat treatment, and testing for bolts, studs, and threaded rod used in pressure vessels, flanged joints, and power generation equipment. If you're machining A193 material, it's usually pre-hardened 4140 that machines like 4140 pre-hard. Compare to 4140 (same base material) and A320 (the low-temperature version of A193).
A234 / SA-234
Live pricesASTM A234 covers wrought carbon steel and alloy steel pipe fittings (elbows, tees, reducers) for moderate and high-temperature service. Grade WPB is the most common, using carbon steel similar to A106 Grade B pipe. Not a bar stock material. These are forged or formed fittings. If you're machining A234 fittings, expect mild steel cutting characteristics. Compare to A105 (forged flanges and fittings, similar chemistry) and A403 (stainless steel pipe fittings).
A307
Live pricesASTM A307 covers low-carbon steel externally and internally threaded standard fasteners. Grade A is the basic bolt for general, non-critical applications. This is the cheapest structural bolt, essentially A36 steel in bolt form. Used for wood connections, light structural joints, and non-critical fastenings where A325 or A490 high-strength bolts aren't required. Compare to A325 (high-strength structural bolt, much stronger) and A36 (same type of steel, different product form).
A500 Structural Tube
Live pricesThe structural tube spec. If you're buying square, rectangular, or round structural tubing (HSS), it's almost certainly A500. Grade B has a minimum yield of 46,000 PSI, Grade C is 50,000 PSI. Most mills produce to Grade C and dual-certify it. This is not the same as buying A36 plate and rolling it into a tube. A500 is formed and welded from flat-rolled steel, so it has a welded seam. The chemistry is loosely controlled like A36, so expect variability. Machinability is adequate but this material is meant to be cut, welded, and bolted, not precision machined. You'll see it in structural frames, guardrails, trailer frames, and building columns. Compare to A36 (the equivalent spec for plate, bar, and shapes) and DOM tubing (drawn over mandrel, much tighter tolerances, typically 1020 or 1026, better for machining applications).
A513
Live pricesASTM A513 covers electric-resistance-welded carbon steel mechanical tubing. This is the workhorse mechanical tube spec: lighter gauge, tighter tolerances, and better surface finish than structural A500 tubing. Used for furniture, automotive components, conveyor rollers, and any mechanical application. Available in round, square, and rectangular profiles. Typically 1010-1020 carbon range. Machines adequately for secondary operations. Compare to A500 (structural, heavier wall, looser tolerances) and DOM tubing (drawn over mandrel, much tighter ID tolerance).
A514 (T-1) Plate
Live pricesQuench and tempered alloy plate. 100 KSI minimum yield strength. Also sold under the trade name T-1 (by US Steel). This is the high end of structural plate. Roughly 3x the yield strength of A36. Used for heavy equipment, pressure-critical structures, bridge components, and military applications. Requires careful welding procedures with preheat, low-hydrogen consumables, and controlled interpass temperatures. Machines harder than A36 but not terribly since it's still a low-carbon base. Good subzero toughness. Expensive. Compare to A36 (1/3 the strength, much cheaper, easier to fabricate), A572 GR50 (middle ground in strength), and AR400F (similar hardness but optimized for wear, not structural strength).
A516 Grade 70
Live pricesPressure vessel plate. 70 KSI tensile (not yield), with 260 MPa (38 KSI) minimum yield. Specifically designed for welded pressure vessels and boilers where notch toughness at moderate and lower temperatures is critical. Silicon-killed with fine grain structure and tighter chemistry controls than A36, especially on sulfur and phosphorus. Must meet Charpy impact testing at specific temperatures. Machines slightly better than A36 according to machinists who've cut both. Comes with mill scale and is usually flame-cut to size. Thicker plates (over 1.5 inches) are normalized. If you're machining A516, your customer probably needs MTRs with heat and slab numbers for ASME code compliance. Compare to A36 (structural, no impact testing, cheaper) and A537 (higher strength pressure vessel plate).
A519
Live pricesASTM A519 covers seamless carbon and alloy steel mechanical tubing. No weld seam, so you get uniform strength around the circumference. Used for hydraulic cylinders, high-pressure applications, and any tube that needs to handle internal pressure or stress without a potential weld seam failure point. Chemistry depends on the grade ordered (1018, 1026, 4130, 4140, etc.). More expensive than welded tubing. Compare to A513 (welded, cheaper, adequate for most mechanical applications) and DOM (welded then drawn over mandrel, tighter than welded but has a seam).
A529 Grade 50
Live pricesASTM A529 covers high-strength carbon-manganese structural steel shapes, plates, and bars. Grade 50 (the most common) has 50 KSI minimum yield, similar to A572 GR50 but with a slightly different chemistry approach. Used for structural applications where A572 would also work. Compare to A572 GR50 (more widely specified, essentially the same performance) and A36 (lower strength, cheaper).
A572 GR50/DH36
Sourcing guideDual-certified higher-strength structural and marine plate. Meets A572 GR50 (50 KSI yield structural) and ABS DH36 (51 KSI yield marine grade with impact testing). DH36 is a higher-strength hull steel used in shipbuilding, offshore platforms, and marine structures. The dual-cert gives fabricators maximum flexibility. Compare to A36/ABS GR A (lower strength dual-cert) and A572 GR50 (structural only, no marine cert).
A572 Grade 50
Live pricesHigh-strength low-alloy (HSLA) structural steel with 50 KSI minimum yield. Stronger than A36 (36 KSI yield) while maintaining good weldability. Micro-alloyed with vanadium, columbium, or both to achieve the higher strength without increasing carbon content significantly. This is the modern structural steel. Most new construction specifies A572 GR50 over A36 because you can use lighter sections for the same load. Available in plate, bar, and shapes. Machines similarly to A36. Hot rolled with mill scale. Compare to A36 (lower strength, cheaper, increasingly being replaced), A36/GR50 (dual-cert material that meets both), and A514 (quench and tempered for much higher strength).
A588 Weathering Steel
Live pricesWeathering steel. Also known by the trade name Cor-Ten. Contains copper, chromium, nickel, and phosphorus that form a stable rust-colored patina when exposed to the atmosphere, eliminating the need for painting. 50 KSI minimum yield, comparable to A572 GR50 in strength. The patina is self-healing. If scratched, it re-forms. Used for bridges, architectural applications, outdoor sculptures, and any exposed structural steel where you want the maintenance-free weathered look. Requires a wet/dry cycling environment to form the patina properly. In consistently wet or marine environments, it just rusts normally. Compare to A572 GR50 (same strength, needs paint) and A606 TY4 (weathering sheet/strip grade).
A606 Type 4
Live pricesWeathering steel sheet and strip, Type 4. The sheet equivalent of A588 plate. Same copper-bearing chemistry that forms a protective patina. Used for roofing, siding, architectural panels, and formed structural members that will be left unpainted. Type 4 indicates higher corrosion resistance than Types 1-3. Compare to A588 GR B (plate equivalent) and standard mild steel sheet (needs painting or coating).
A653
Live pricesASTM A653 covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process. This is standard galvanized sheet steel. The base steel can be CS (commercial), FS (forming), SS (structural), or HSLAS. The galvanized coating (G90 is the most common weight) provides corrosion protection for outdoor applications. Used for roofing, siding, ductwork, automotive panels, and any sheet metal application needing corrosion resistance. Not a machining material. Compare to A1008 (cold-rolled, no coating) and A792 (Galvalume-coated, aluminum-zinc alloy).
A656 Grade 80
Live pricesHSLA plate steel with 80 KSI minimum yield, Type 7 (vanadium-nitrogen treated). A high-strength plate grade for structural and heavy equipment applications. Fills the gap between A572 GR50 (50 KSI) and A514 (100 KSI). Weldable with proper procedures but more demanding than A572. Used for crane booms, heavy equipment frames, and structural members where you need more strength than GR50 without going to quench-and-tempered plate. Compare to A572 GR50 (lower strength, easier to weld) and A514 (Q&T, higher strength, more expensive).
A787
Live pricesASTM A787 covers electric-resistance-welded metallic-coated carbon steel mechanical tubing. Essentially A513 mechanical tubing with a galvanized or other metallic coating. Used for fence posts, handrails, and outdoor furniture where corrosion protection is needed on a tube product. Compare to A513 (uncoated mechanical tubing) and A500 (structural tubing, typically uncoated).
A847
Sourcing guideASTM A847 covers cold-formed welded and seamless high-strength, low-alloy structural tubing with improved atmospheric corrosion resistance. This is weathering steel in tube form. Think Cor-Ten for HSS sections. Develops a protective patina like A588 plate. Used for exposed architectural tubing, bridge railings, and outdoor structures where unpainted weathering steel is desired. Compare to A500 (standard structural tubing, needs paint) and A588 (weathering steel plate).
A992
Live pricesASTM A992 is the current standard for hot-rolled structural steel W-shapes (wide-flange beams). 50 KSI minimum yield with controlled chemistry (maximum carbon, carbon equivalent limits) for improved weldability. This essentially replaced A36 and A572 as the go-to spec for wide-flange beams in structural steel construction. If you're buying W-beams today, they're almost certainly A992. Not a machining material. Compare to A572 GR50 (the plate and bar equivalent) and A36 (older spec, lower strength).
A1008
Live pricesASTM A1008 covers cold-rolled carbon steel sheet in various grades. The most common commercial sheet steel specification for flat products. Encompasses CS (commercial steel), DS (drawing steel), DDS (deep drawing), and EDDS (extra deep drawing) qualities. What you get depends on the grade suffix. Machines and forms like standard low-carbon sheet. Compare to CS-B (a specific quality within A1008) and A1011 (hot-rolled equivalent).
A1011
Live pricesASTM A1011 covers hot-rolled carbon steel sheet and strip. The hot-rolled counterpart to A1008. Comes with mill scale and wider thickness tolerances than cold-rolled. Cheaper than cold-rolled for applications where surface finish and tight dimensions aren't critical. Used for structural fabrication, general sheet metal work, and any application where the part gets painted or coated. Compare to A1008 (cold-rolled, better surface, tighter tolerances) and A36 (structural plate, similar chemistry).
AR200
Live pricesAbrasion-resistant plate at 200 Brinell hardness. The softest of the AR grades, only marginally harder than standard structural plate. Easier to form, cut, and weld than AR400 while providing some improvement in wear life over A36. Used where moderate abrasion resistance is needed without the fabrication headaches of harder grades. Compare to A36 (similar hardness, no wear specification), AR235 (slightly harder), and AR400F (significantly harder, better wear life).
AR235
Live pricesAbrasion-resistant plate at 235 Brinell hardness. Middle ground between AR200 and AR400. Provides better wear life than A36 while remaining relatively easy to form and weld. Used in agricultural equipment, light mining applications, and material handling where AR400 is overkill. Compare to AR200 (softer) and AR400F (harder, better wear life but harder to fabricate).
AR400 / AR400F
Live pricesAbrasion-resistant plate, 400 Brinell hardness (approximately HRC 38-42). The 'F' typically indicates it's a formable variant with controlled chemistry for better bending and welding than standard AR400. This is wear plate, not structural plate. Used for dump truck beds, chutes, hoppers, conveyor liners, and any surface that takes a beating from rocks, gravel, or other abrasive material. The hardness is achieved through quench and tempering. Machines much harder than A36 but not impossibly. Needs carbide tooling and reduced speeds. Don't try to drill it with HSS. Compare to AR200 and AR235 (softer, easier to form), A514 (structural strength, not wear-optimized), and A516 (pressure vessel, completely different application).
AR500
Live pricesAbrasion-resistant plate at 500 Brinell hardness (approximately HRC 48-52). Significantly harder than AR400 and more resistant to wear from abrasive materials. The tradeoff is much harder to form, cut, and weld. Needs plasma or laser cutting. Don't try to shear it. Preheating is mandatory for welding. Used for the highest-wear applications: mining chutes, rock crusher liners, dragline buckets, and anywhere AR400 wears out too fast. Compare to AR400F (softer, much easier to fabricate) and AR600 (even harder, essentially impossible to form).
AZ55
Sourcing guideA Galvalume (55% aluminum-zinc alloy) coated steel sheet designation. The AZ55 refers to the coating weight (0.55 oz/sq ft total both sides). Excellent corrosion resistance, significantly better than standard galvanized in most environments. Used for roofing, siding, and building panels. Not a machining material. Compare to A653 galvanized (zinc coating, cheaper, adequate for many applications) and bare A1008 (no coating, indoor use only).
CS-B
Live pricesCommercial Steel, Bending Quality. This is a generic designation for low-carbon steel sheet and strip intended for moderate forming and bending applications. CS-B doesn't guarantee specific chemistry or mechanical properties beyond being formable enough for simple bends. It's the cheapest sheet steel you can buy. What you actually get is whatever the mill had running that day, typically somewhere in the 1008-1020 carbon range. Fine for brackets, covers, simple enclosures, and anything that gets bent on a press brake and welded. Not appropriate for machining or any application where you need consistent mechanical properties. Compare to A36 (has actual guaranteed minimum yield strength), 1018 (specified chemistry, better machinability), and 1008/1010 (similar softness but with defined chemistry for deeper forming).
CSA G40.21 50W
Sourcing guideCanadian structural steel with 50 KSI (350 MPa) minimum tensile, weldable. The Canadian equivalent of A572 GR50. Higher strength than 44W with good weldability. Used in Canadian construction and infrastructure projects. Compare to A572 GR50 (US equivalent) and 44W (lower strength Canadian grade).
DOM
Live pricesDrawn Over Mandrel tubing. Not a specific alloy but a manufacturing process. A welded tube (typically 1020 or 1026 steel) is cold-drawn over a mandrel to eliminate the weld seam's inner bead, producing uniform wall thickness and tight ID tolerances. The drawing process work-hardens the steel, increasing strength. This is hydraulic cylinder tubing, steering column tubing, and anything that needs a smooth, precision ID. Machines well for secondary operations. More expensive than standard welded tubing but much cheaper than seamless. Compare to A519 seamless (no seam at all, highest quality) and A513 welded (cheaper, seam bead on ID).
DS-B
Live pricesDrawing Steel, Bending Quality. A sheet steel specification for material intended for moderate drawing and bending operations. Similar to CS-B but with slightly better formability guarantees. Typical carbon content is in the 1006-1010 range. Not a machining material. Used for stamped parts, enclosures, and formed sheet metal components. Compare to CS-B (commercial steel, less formable) and 1008/1010 (defined chemistry alternatives).
ETD-150
Live pricesElevated Temperature Drawn 150. LaSalle Steel's (now Niagara LaSalle) proprietary process applied to 4140-type chemistry. The '150' refers to 150 KSI minimum tensile strength. Pre-hardened to HRC 32+ with very low residual stress, so it holds size during machining and doesn't go goofy when you cut a keyway. Machinists love it. It cuts as easily as 1144 Stressproof but it's about 30% stronger. Selenium and sulfur are added to enhance machinability. The low stress means you can skip the stress-relieving step you'd normally do with 4140 pre-hard before nitriding or finish machining. Expensive (roughly 2x the cost of regular 4140) and only available in round bar. Not weldable. Compare to 4140 pre-hard (cheaper, might move during machining, needs stress relief), 1144 A311 CL-B (similar concept but lower strength), and Fatigue-Proof (even stronger ETD product at 175 KSI).
HSLAS GR50
Live pricesHigh-Strength Low-Alloy Steel, Grade 50. A sheet and strip specification (ASTM A653 or similar) for HSLA steel with 50 KSI minimum yield. This is the coil/sheet equivalent of what A572 GR50 is for plate and shapes. Used for roll-formed structural members, automotive components, and any stamped or formed part that needs more strength than mild steel. The 'S' typically indicates it meets the structural quality requirements. Compare to A572 GR50 (same strength level, plate/shapes instead of sheet) and HSLAS-F GR50 (forming quality variant).
HSLAS-F GR50
Live pricesHSLA Steel, Forming Quality, Grade 50. Same 50 KSI yield as HSLAS GR50 but manufactured to tighter inclusion and surface quality standards for better formability. The 'F' designation means the steel is suitable for more aggressive bending and forming operations without cracking. Used for automotive structural members, roll-formed sections, and any part that needs to be formed from high-strength sheet. Compare to HSLAS GR50 (structural quality, less formable) and HSLAS-F GR80 (higher strength forming grade).
HSLAS-F GR80
Live pricesHSLA forming quality at 80 KSI yield. Serious high-strength sheet steel for structural applications that need significantly more strength than GR50. Much harder to form and weld than GR50 due to the higher strength. Used in heavy truck frames, construction equipment, and structural components where weight savings justify the premium. Compare to HSLAS-F GR50 (lower strength, easier to form) and STRENX 100XF (even higher strength).
J525
Live pricesSAE J525 mechanical tubing specification. Covers welded or seamless, cold-drawn, low-carbon steel tubing for hydraulic lines, mechanical applications, and fluid power systems. The spec ensures dimensional accuracy, surface finish, and mechanical properties suitable for bending and flaring. Not a material grade itself but a manufacturing spec. The steel underneath is typically 1008-1020 range. If you see J525 on a PO, the customer cares about tube quality and dimensional precision, not just the base alloy. Compare to A500 (structural tubing, lower precision) and DOM tubing (drawn over mandrel, similar quality concept).
LF2
Sourcing guideASTM A350 LF2 is a forging specification for low-temperature service. Covers carbon steel flanges, fittings, and valves rated for service down to -50°F. The chemistry is similar to 1020-1030 range steel but with mandatory Charpy impact testing at the rated low temperature. Normalized heat treatment is required. If you're machining LF2 forgings, it cuts like mild steel. The special part is the certification and testing, not the machinability. Compare to A105 (standard temperature forging flanges) and A350 LF3 (even lower temperature rating, nickel-bearing).
LOW CARBON
Live pricesGeneric designation for steel with no specific grade called out, just 'low carbon.' Typically means under 0.25% carbon. What shows up could be anything from 1008 to 1020 depending on what the supplier has in stock. Not appropriate for any application where you need guaranteed properties. If a drawing says 'low carbon steel,' it's worth asking the engineer to specify an actual grade. Compare to .15 C MAX (at least has a defined upper carbon limit) and 1018 (the standard go-to low carbon machining grade).
M1044
Live pricesModified 1044 steel. The 'M' prefix typically indicates a chemistry modification, often for improved machinability or to meet a specific customer spec. Carbon content around 0.44%. Properties similar to 1045 with whatever modification the manufacturer applied. Not a standard AISI grade. If you're quoting work in M1044, ask for the actual chemical analysis or reference the customer's material specification. Compare to 1045 (standard grade) and 1141 (resulfurized version for better machinability).
Maraging 250
Live pricesMaraging steel (250 KSI tensile). An ultra-high-strength nickel-cobalt-molybdenum steel that hardens through age-hardening of a low-carbon martensite matrix, not through carbon-based heat treatment. Machines beautifully in the annealed condition: soft, ductile, clean chips. After aging at 900°F, it reaches 250 KSI with exceptional toughness. Dimensional change during aging is predictable and minimal. Used for aerospace structural components, missile casings, die-casting dies, and precision tooling. Extremely expensive. Compare to 4340 (much cheaper, decent strength but nowhere near 250 KSI) and Maraging 300 (even stronger).
Maraging 300
Live pricesMaraging steel (300 KSI tensile). Same nickel-cobalt-molybdenum maraging family as 250, aged to even higher strength. Among the strongest steels commercially available. Same excellent machinability in the annealed state. Used for aircraft landing gear, rocket motor cases, and ultra-high-performance tooling. Costs more than Maraging 250 due to higher cobalt content. Compare to Maraging 250 (slightly lower strength, cheaper) and Maraging 350 (maximum strength, highest cost).
Maraging 350
Sourcing guideMaraging steel (350 KSI tensile). The top of the maraging family. Maximum strength achievable in a commercially available steel. Same ease of machining in the annealed condition as 250 and 300 grades. Extremely rare and expensive. Reserved for the most demanding applications where no other material will do. Compare to Maraging 300 (slightly lower strength, more available) and custom precipitation-hardening alloys.
SS GR36
Live pricesStructural Shapes Grade 36. This is essentially A36 but specifically designated for rolled structural shapes (W-beams, channels, angles) rather than plate or bar. The 'SS' prefix indicates it's produced to the structural shapes specification. Same 36 KSI yield as A36. Not a machining material. Compare to A36 (same strength level for plate/bar) and A572 GR50 (higher strength structural shapes).
Strenx 100XF
Live pricesSSAB's branded ultra-high-strength structural plate with 100 KSI (700 MPa) minimum yield. Quenched and tempered with excellent toughness at low temperatures. The 'XF' indicates extra-fine grain for improved toughness and fatigue properties. This is premium European-origin plate for cranes, heavy equipment, and structural applications where every pound matters. Requires careful welding with low-hydrogen procedures and controlled heat input. Compare to A514 GR B (similar US spec at 100 KSI yield) and A656 GR80 (80 KSI, lower tier).
US Suppliers That List Carbon & Alloy Steel
Showing 5 of 159 suppliers in our directory. Filter by grade, shape, and ship-to state in Supplier Search.
Corporate family also includes: American Alloy Steel, Chatham Steel, Pacific Metal Company (+8 more)
How Shop Buyers Choose a Carbon or Alloy Steel Grade
Quick side-by-side reference for common forms, shop applications, and purchasing pitfalls before you send out quotes.
| Grade | Typical Forms & Sizes | Best Shop Fit | What to Watch Out For |
|---|---|---|---|
| A36 & A572 Grade 50 | Hot-rolled plate, flat/round bar, angle, channel; A992/A572 wide-flange beams | Welded machine frames, skids, gussets, base plates, and structural fabrication | Mill scale and loose chemistry/dimensional tolerances; dual-cert A36/A572-50 is common in thicker plate |
| A500 HSS & DOM Tubing | 20 ft / 24 ft / 40 ft square & rectangular HSS (A500); 17 – 24 ft round DOM | Welded structural frames (A500) vs concentric ID bushings, rollers, and cylinders (DOM) | A500 has a raised internal weld flash seam; order DOM (1020/1026) whenever an ID bore or press-fit is needed |
| 1018 & 1045 Cold-Finished | 12 ft & 20 ft cold-drawn rounds, flats, squares, hexes; TGP shafting | General CNC brackets/spacers/weldments (1018) and medium-strength shafts/pins (1045) | Cold-drawn flat bar bows when milled on one face due to cold-drawing skin stress; hot-rolled pickled or stress-relieved avoids warp |
| 12L14 & 1144 Stressproof | 12 ft cold-drawn round and hex bar | Fastest screw-machine fittings (12L14) and low-warp 100 KSI pre-hard shafts/splines (1144) | Never weld 12L14 (lead + sulfur causes hot cracking) and check RoHS lead limits on export assemblies |
| 4140 / 4142 & 4340 | Annealed or Q&T/HT (HRC 28 – 32) hot-rolled, cold-finished, and TGP bar & plate | High-strength axles, bolts, gears, toolholders, adapters, and heavy shafts | Always specify Annealed (~197 BHN) vs Pre-Hardened Q&T (~HRC 28 – 32 / ASTM A193 B7); guessing wrong ruins quotes and heat treat |
| 4130 & 8620 | Normalized tube/sheet & bar (4130); hot-rolled/cold-drawn bar (8620) | TIG-welded roll cages/airframe mounts (4130) and carburized case-hardened gears/pins (8620) | 4130 structural tubing splits between commercial mechanical spec and aerospace MIL-T-6736 / AMS 6360 |
What to Specify on a Steel RFQ
Include these details on line 1 of your quote request so distributors price the same spec and surface finish.
Hot-Rolled (HR), Pickled & Oiled (HRPO), or Cold-Finished (CF)
Hot-rolled carries black mill scale that eats laser nozzles, press-brake dies, and end mills unless pickled (HRPO). Cold-finished (1018, 4140 CF) holds minus-side micrometer tolerances ready for collets without turning the OD.
Condition on chromoly alloy bar (Annealed vs Q&T / HT)
4140 and 4340 pre-hardened (Q&T / HT, HRC 28 – 32) lets you finish-machine shafts with zero outside heat-treat distortion or wait, whereas parts needing HRC 45 – 52 through-hardening must be bought annealed.
Full stock lengths to match local route trucks
Cold-finished bar typically comes in 12 ft lengths, hot-rolled merchant bar and A513 tube in 20 ft, A500 HSS in 20 ft / 24 ft / 40 ft, and structural beams in 20 ft / 40 ft. Asking a local route-truck house for half-cut 10 – 12 ft bundles avoids over-length LTL fees.
Burnout / plasma / oxy-fuel blanks on heavy plate
Above 1.5 – 2 in thickness in A36, A572-50, A516-70, or 4140 plate, plate burn shops will flame-cut, Blanchard-grind, and stress-relieve blanks cheaper than your VMC can hog raw rectangular drops.
Frequently Asked Questions: Buying Carbon & Alloy Steel
- Why does local truck delivery matter more on carbon steel than on any other metal?
- At $0.60 – $1.60/lb on structural and mild steel, a $300 out-of-state LTL common-carrier charge on a 1,000 lb bundle adds $0.30/lb (20~40% of the metal cost), whereas a regional service center's route truck often drops it for $35 – $75 or free at weight.
- When should a shop specify 1144 (Stressproof) instead of 4140 pre-hard?
- Heavy cold-drawn stress-relieved 1144 hits ~100 KSI yield (~HRC 24) while machining at ~83% of 12L14 speeds and staying remarkably straight when keyways or splines are cut down one side, saving cycle time over tougher 4140 Q&T.
- Is dual-certified A36 / A572 Grade 50 acceptable when a print specifies A36?
- Almost always yes on structural weldments (higher yield strength while still meeting A36 chemistry/tensile windows), though you should double-check seismic fuse designs or tight cold-bending prints where unexpectedly high yield increases springback.
Already have a supplier quote in hand? Check if the price is fair.