Stainless Steel 430 Flat Bar Prices
Current 430 Stainless Steel Flat Bar prices by dimension, with $/lb for cross-size comparison.
About 430|A ferritic stainless with 16-18% chromium. Takes a nice shiny finish, which is why it shows up in appliances, kitchen equipment, and decorative trim. Magnetic, unlike 304. Machines better than austenitic grades since it doesn't work harden as aggressively. Think of it as somewhere between carbon steel and 304 in terms of cutting difficulty. Chips are shorter and more manageable than what you get from 304 or 316. Not as corrosion resistant as 304 since there's no nickel, so it's limited to mild environments. Can't handle chlorides or marine exposure. Weldability is fair with proper technique. Compare to 304 (better corrosion resistance but harder to machine and more expensive) and 409 (cheaper, worse corrosion resistance, used mostly for exhaust systems).
About Flat Bar|Rectangular solid stock used for brackets, fixtures, machine bases, and any part where you need a wide, flat starting profile. It's common in both machining and structural fabrication.
Get pricing analysis in your inbox
The Material Report, twice a month.
Raw Material Market Prices
1.0%30d
Nickel
$7.72/lb
Nickel is a primary cost driver for stainless steel and superalloys.
Raw Material Market Prices
3.6%30d
Steel HRC
$1,074/short ton
$0.54/lb
Hot Rolled Coil (HRC) is the benchmark for raw steel prices.
Show additional sizes(8 products, retail pricing)
Rows with a colored edge have retail pricing only
Width
Thickness
Width | Thickness | $/lb | $/ft | 7d |
|---|---|---|---|---|
| 1/2"Retail | 0.018" | $131.94 | $3.99 | 0.0% |
| 1/2"Retail | 0.03" | $99.01 | $4.99 | 0.0% |
| 3/4"Retail | 0.018" | $110.01 | $4.99 | 0.0% |
| 3/4"Retail | 0.023" | $86.09 | $4.99 | 0.0% |
| 3/4"Retail | 0.03" | $66.01 | $4.99 | 0.0% |
| 1"Retail | 0.018" | $82.51 | $4.99 | 0.0% |
| 1"Retail | 0.023" | $64.57 | $4.99 | 0.0% |
| 1"Retail | 0.03" | $59.42 | $5.99 | 0.0% |
8 items