EMJ
EMJ is a service center with 42 listed US locations in AL, AZ, CA, CO, CT and 21 other states, listing stainless, alloy steel, carbon steel, aluminum across its published catalog.
- Website
- www.emjmetals.com
Product Listings
Grades, shapes, and size ranges listed on EMJ's website and published catalogs. Listing an item does not confirm current floor inventory.
sheet · Normalized or annealed; hot rolled, descaled and oiled or cold rolled, oiled
Size: .025 – .190 (thickness)
plate · Normalized or annealed; hot rolled, descaled and oiled or cold rolled, oiled
Size: .250 – 6.000 (thickness)
hex bar · Annealed and cold finished; maximum Brinell 241
Size: 1 / 2 – 2 (across flats)
round bar · Normalized and tempered, cold finished; maximum Brinell 265
Size: 1 / 4 – 4 (diameter)
round bar · Hot rolled, normalized and tempered; maximum Brinell 235
Size: 3 / 4 – 14 (diameter)
plate · Hot rolled, annealed and descaled
Size: .250 – 6.00 (thickness)
round bar · Hot rolled, normalized and tempered
Size: 1 / 2 – 4 (diameter)
plate · Hot rolled; as rolled or heat treated
Size: 1 / 2 – 7 (thickness)
round bar · Hot rolled annealed; machine straightened; maximum Brinell 212
Size: 3 / 8 – 32 (diameter)
round bar · Annealed and cold drawn; maximum Brinell 235
Size: 3 / 16 – 5 (diameter)
round bar · Hot rolled heat treated; quenched and tempered; machine straightened
Size: 1 / 4 – 32.000 (diameter)
round bar · Heat treated; cold drawn or ground and polished
Size: 1 / 4 – 4 (diameter)
plate · Hot rolled annealed
Size: 1 / 2 – 12 (thickness)
flat bar · Hot rolled; as rolled; double concave, round edge
Size: .214 – 1.000 (thickness)
plate · Hot rolled annealed
Size: 1 / 2 – 8 (thickness) · product-line range
square bar · Hot rolled annealed; maximum Brinell 212
round bar · Hot rolled annealed; machine straightened; maximum Brinell 212
Size: 1 / 4 – 13 (diameter)
flat bar · Hot rolled annealed; maximum Brinell 212
Size: 1 – 10 (width)
plate · Hot rolled
Size: 1 / 2 – 10 (thickness) · product-line range
round bar · Hot rolled heat treated; Brinell hardness 262-311
Size: 1 / 2 – 10 (diameter) · product-line range
round bar · Pressed; heat treated; Brinell hardness 262-311
Size: 11 – 18 (diameter)
round bar · Quenched and tempered
Size: 1.875 – 9.500 (diameter)
plate · Tooling plate; machined; free from internal stresses
Size: 250 – 6 000 (thickness)
round bar · Cold finished
Size: 1 / 8 – 12 (diameter)
round bar · Cold finished
Size: 1 / 4 – 7 (diameter)
round bar · Ground and polished precision shafting
Size: 1 / 2 – 7 (diameter)
square bar · Cold drawn
Size: 1 / 8 – 3 (width)
round bar · Cold finished; leaded
Size: 1 / 8 – 6 (diameter) · product-line range
hex bar · Cold finished; leaded
Size: 1 / 4 – 4 (across flats)
round bar · Cold finished
Size: 1 / 8 – 6 (diameter) · product-line range
flat bar · Cold drawn; leaded
Size: 5 / 16 – 3 (thickness)
hex bar · Cold drawn; stress relieved
Size: 3 / 8 – 2 (across flats)
round bar · Heavy draft cold drawn; modified stress relief anneal
Size: .236" – 1.250" (diameter)
square bar · Hot rolled, Special Quality
Size: 1 / 2 – 6 (width)
round bar · Hot rolled, Special Quality
Size: 2 1 / 2 – 12 (diameter)
round bar · Hot rolled, Special Quality
Size: 1 1 / 8 – 10 (diameter)
round bar · Condition A, annealed, ground
Size: 1 / 8 – 3 (diameter) · product-line range
sheet · 1/4 Hard, No. 2B finish, bright cold rolled; 1/2 Hard, No. 2B finish, bright cold rolled
Size: .012 – .125 (thickness)
plate · Hot rolled, annealed and pickled
Size: 3 / 16 " through 4 1 / 2 " (thickness)
round bar · Condition A, annealed
Size: 1 / 8 – 14 (diameter)
square bar · Condition A, annealed
Size: 3 / 16 – 6 (width)
round bar · Condition A, annealed
Size: 1 / 16 – 12 (diameter)
hex bar · Condition A, annealed, cold drawn; maximum Brinell 235
square bar · Condition A, annealed; maximum Brinell 235
Size: 1 / 8 – 4 (width)
flat bar · Condition A, annealed; cold drawn or hot rolled pickled
sheet · No. 2B finish, bright cold rolled, annealed and pickled
Size: .024" (24 Ga.) – .135" (10 Ga.) (thickness)
plate · Hot rolled, annealed and pickled
Size: 3 / 16 " through 4" (thickness) · product-line range
hex bar · Annealed and cold drawn
Size: 7 / 16 – 3 (across flats)
round bar · Condition A, annealed
Size: 1 / 8 – 10 (diameter)
sheet · No. 2D finish, dull cold rolled, annealed and pickled
Size: .012" (30 Ga.) – .156" (9 Ga.) (thickness)
square bar · Condition A, annealed
Size: 1 / 4 – 4 (width)
hex bar · Condition A, annealed, cold drawn
Size: 1 / 4 – 2 (across flats)
sheet · No. 2D finish, dull cold rolled, annealed and pickled
Size: .012" (30 Ga.) – .160" (9 Ga.) (thickness)
sheet · Annealed and pickled, No. 2D finish, dull cold rolled
Size: .032" (22 Ga.) – .135" (10 Ga.) (thickness)
hex bar · Annealed and cold drawn, Brinell 241 maximum; or heat treated and cold drawn, Rockwell C 25-32
round bar · Condition A, annealed
Size: 1 / 4 – 5 (diameter)
round bar · Condition A or hardened
Size: 3 / 32 – 12 (diameter)
square bar · Cold drawn and hot rolled, annealed and pickled
Size: 1 / 4 – 6 (width)
plate · Hot rolled, annealed and pickled
Size: 3 / 16 " through 2" (thickness)
sheet · Condition A, No. 2D finish, dull cold rolled, annealed and pickled
Size: .0161" (27 Ga.) – .160" (9 Ga.) (thickness)
plate
Size: 3 / 16 " to 3 1 / 2 " (thickness)
plate
Size: 3 / 16 " to 3 1 / 2 " (thickness)
plate
Size: 3 / 16 " to 3 1 / 2 " (thickness)
plate
Size: 3 / 16 " to 3 1 / 2 " (thickness)
plate
Size: 3 / 16 " to 3 1 / 2 " (thickness)
plate · Quenched and tempered
Size: 3 / 16 " to 6" (thickness)
plate · Quenched and tempered
Size: 1 / 4 " to 1 1 / 2 " (thickness)
plate · Hot rolled, pressure vessel quality
Size: 3 / 16 " to 8" (thickness)
plate · Hot rolled, pressure vessel quality
Size: 3 / 16 " to 8" (thickness)
| Material | Shape | Supplier Lists Grades | Stated Size Range | Source | Report availability |
|---|---|---|---|---|---|
| alloy steel | sheetCondition: Normalized or annealed; hot rolled, descaled and oiled or cold rolled, oiled | "4130" | .025 – .190(thickness) | per 2007 catalog source | |
| alloy steel | plateCondition: Normalized or annealed; hot rolled, descaled and oiled or cold rolled, oiled | "4130" | .250 – 6.000(thickness) | per 2007 catalog source | |
| alloy steel | hex barCondition: Annealed and cold finished; maximum Brinell 241 | "4140" | 1 / 2 – 2(across flats) | per 2007 catalog source | |
| alloy steel | round barCondition: Normalized and tempered, cold finished; maximum Brinell 265 | "4340" | 1 / 4 – 4(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled, normalized and tempered; maximum Brinell 235 | "4340" | 3 / 4 – 14(diameter) | per 2007 catalog source | |
| alloy steel | plateCondition: Hot rolled, annealed and descaled | "4340" | .250 – 6.00(thickness) | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled, normalized and tempered | "HS 220-18" | 1 / 2 – 4(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled | "4130" | 1 3 / 8 – 13(diameter) | per 2007 catalog source | |
| alloy steel | plateCondition: Hot rolled; as rolled or heat treated | "4130" | 1 / 2 – 7(thickness) | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled annealed; machine straightened; maximum Brinell 212 | "4140", "4142", "4145", "4150", "41L40", "41L42", "41L50" | 3 / 8 – 32(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Annealed and cold drawn; maximum Brinell 235 | "4140", "4142", "41L40", "41L42", "41L50" | 3 / 16 – 5(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled heat treated; quenched and tempered; machine straightened | "4140", "4142", "4150", "41L40", "41L42", "41L50" | 1 / 4 – 32.000(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Heat treated; cold drawn or ground and polished | "4140", "4142", "41L40", "41L42" | 1 / 4 – 4(diameter) | per 2007 catalog source | |
| alloy steel | plateCondition: Hot rolled annealed | "4340" | 1 / 2 – 12(thickness) | per 2007 catalog source | |
| alloy steel | flat barCondition: Hot rolled; as rolled; double concave, round edge | "5160" | .214 – 1.000(thickness) | per 2007 catalog source | |
| alloy steel | plateCondition: Hot rolled annealed | "6150" | 1 / 2 – 8(thickness)Product-line range across grades | per 2007 catalog source | |
| alloy steel | square barCondition: Hot rolled annealed; maximum Brinell 212 | "6150" | Not stated | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled annealed; machine straightened; maximum Brinell 212 | "6150" | 1 / 4 – 13(diameter) | per 2007 catalog source | |
| alloy steel | flat barCondition: Hot rolled annealed; maximum Brinell 212 | "6150" | 1 – 10(width) | per 2007 catalog source | |
| alloy steel | plateCondition: Hot rolled | "8620" | 1 / 2 – 10(thickness)Product-line range across grades | per 2007 catalog source | |
| alloy steel | round barCondition: Hot rolled heat treated; Brinell hardness 262-311 | "4150 Modified Resulphurized" | 1 / 2 – 10(diameter)Product-line range across grades | per 2007 catalog source | |
| alloy steel | round barCondition: Pressed; heat treated; Brinell hardness 262-311 | "4150 Modified Resulphurized" | 11 – 18(diameter) | per 2007 catalog source | |
| alloy steel | round barCondition: Quenched and tempered | "9 Chrome 1 Moly" | 1.875 – 9.500(diameter) | per 2007 catalog source | |
| aluminum | flat barCondition: T6 | "6061-T6" | Not stated | per 2007 catalog source | |
| aluminum | flat barCondition: T6511 | "6061-T6511" | Not stated | per 2007 catalog source | |
| aluminum | round barCondition: T6 | "7075-T6" | 3 / 16 – 8(diameter) | per 2007 catalog source | |
| aluminum | round barCondition: T651 | "7075-T651" | 3 / 16 – 8(diameter) | per 2007 catalog source | |
| aluminum | flat barCondition: Cold Finished; T6 | "7075-T6" | Not stated | per 2007 catalog source | |
| aluminum | flat barCondition: Cold Finished; T6511 | "7075-T6511" | Not stated | per 2007 catalog source | |
| aluminum | square barCondition: T651 | "7075-T651" | 1 / 2 – 4(width) | per 2007 catalog source | |
| aluminum | plateCondition: Tooling plate; machined; free from internal stresses | Grade not listed | 250 – 6 000(thickness) | per 2007 catalog source | |
| carbon steel | round barCondition: Cold finished | "1018" | 1 / 8 – 12(diameter) | per 2007 catalog source | |
| carbon steel | hex barCondition: Cold drawn | "1018" | 3 / 16 – 4(across flats) | per 2007 catalog source | |
| carbon steel | square barCondition: Cold finished | "1018" | Not stated | per 2007 catalog source | |
| carbon steel | flat barCondition: Cold drawn | "1018" | Not stated | per 2007 catalog source | |
| carbon steel | round barCondition: Cold finished | "1040", "1042", "1045" | 1 / 4 – 7(diameter) | per 2007 catalog source | |
| carbon steel | square barCondition: Cold drawn | "1040", "1042", "1045" | Not stated | per 2007 catalog source | |
| carbon steel | round barCondition: Ground and polished precision shafting | "1045" | 1 / 2 – 7(diameter) | per 2007 catalog source | |
| carbon steel | square barCondition: Cold drawn | "1213", "1215" | 1 / 8 – 3(width) | per 2007 catalog source | |
| carbon steel | round barCondition: Cold finished; leaded | "12L14" | 1 / 8 – 6(diameter)Product-line range across grades | per 2007 catalog source | |
| carbon steel | hex barCondition: Cold finished; leaded | "12L14" | 1 / 4 – 4(across flats) | per 2007 catalog source | |
| carbon steel | square barCondition: Cold drawn | "1117" | 1 – 5(width) | per 2007 catalog source | |
| carbon steel | round barCondition: Cold finished | "1117", "11L17" | 1 / 8 – 6(diameter)Product-line range across grades | per 2007 catalog source | |
| carbon steel | hex barCondition: Cold drawn | "1117" | Not stated | per 2007 catalog source | |
| carbon steel | flat barCondition: Cold drawn; leaded | "11L17" | 5 / 16 – 3(thickness) | per 2007 catalog source | |
| carbon steel | hex barCondition: Cold drawn; stress relieved | "1144 Hi Stress" | 3 / 8 – 2(across flats) | per 2007 catalog source | |
| carbon steel | round barCondition: Heavy draft cold drawn; modified stress relief anneal | "1050" | .236" – 1.250"(diameter) | per 2007 catalog source | |
| carbon steel | square barCondition: Hot rolled, Special Quality | "1040", "1042", "1045" | 1 / 2 – 6(width) | per 2007 catalog source | |
| carbon steel | round barCondition: Hot rolled, Special Quality | "1117" | 2 1 / 2 – 12(diameter) | per 2007 catalog source | |
| carbon steel | round barCondition: Hot rolled, Special Quality | "1141" | 1 1 / 8 – 10(diameter) | per 2007 catalog source | |
| stainless | round barCondition: Condition A, annealed, ground | "203S" | 1 / 8 – 3(diameter)Product-line range across grades | per 2007 catalog source | |
| stainless | sheetCondition: 1/4 Hard, No. 2B finish, bright cold rolled; 1/2 Hard, No. 2B finish, bright cold rolled | "301" | .012 – .125(thickness) | per 2007 catalog source | |
| stainless | plateCondition: Hot rolled, annealed and pickled | "304", "304L" | 3 / 16 " through 4 1 / 2 "(thickness) | per 2007 catalog source | |
| stainless | round barCondition: Condition A, annealed | "304", "304L" | 1 / 8 – 14(diameter) | per 2007 catalog source | |
| stainless | hex barCondition: Condition A, annealed, cold drawn | "304", "304L" | Not stated | per 2007 catalog source | |
| stainless | square barCondition: Condition A, annealed | "304", "304L" | 3 / 16 – 6(width) | per 2007 catalog source | |
| stainless | flat barCondition: Hot rolled, annealed and pickled | "304", "304L" | Not stated | per 2007 catalog source | |
| stainless | round barCondition: Condition A, annealed | "303S", "303Se" | 1 / 16 – 12(diameter) | per 2007 catalog source | |
| stainless | hex barCondition: Condition A, annealed, cold drawn; maximum Brinell 235 | "303S", "303Se" | Not stated | per 2007 catalog source | |
| stainless | square barCondition: Condition A, annealed; maximum Brinell 235 | "303S", "303Se" | 1 / 8 – 4(width) | per 2007 catalog source | |
| stainless | flat barCondition: Condition A, annealed; cold drawn or hot rolled pickled | "303S", "303Se" | Not stated | per 2007 catalog source | |
| stainless | sheetCondition: No. 2B finish, bright cold rolled, annealed and pickled | "316" | .024" (24 Ga.) – .135" (10 Ga.)(thickness) | per 2007 catalog source | |
| stainless | plateCondition: Hot rolled, annealed and pickled | "316", "316L", "317", "317L" | 3 / 16 " through 4"(thickness)Product-line range across grades | per 2007 catalog source | |
| stainless | round barCondition: Annealed | "316", "316L" | 1 / 8 – 12(diameter) | per 2007 catalog source | |
| stainless | hex barCondition: Annealed and cold drawn | "316" | 7 / 16 – 3(across flats) | per 2007 catalog source | |
| stainless | square barCondition: Annealed | "316" | Not stated | per 2007 catalog source | |
| stainless | flat barCondition: Hot rolled, annealed and pickled | "316" | Not stated | per 2007 catalog source | |
| stainless | round barCondition: Condition A, annealed | "321" | 1 / 8 – 10(diameter) | per 2007 catalog source | |
| stainless | flat barCondition: Hot rolled, annealed and pickled | "321" | Not stated | per 2007 catalog source | |
| stainless | sheetCondition: No. 2D finish, dull cold rolled, annealed and pickled | "321" | .012" (30 Ga.) – .156" (9 Ga.)(thickness) | per 2007 catalog source | |
| stainless | square barCondition: Condition A, annealed | "321" | 1 / 4 – 4(width) | per 2007 catalog source | |
| stainless | hex barCondition: Condition A, annealed, cold drawn | "321" | 1 / 4 – 2(across flats) | per 2007 catalog source | |
| stainless | round barCondition: Annealed | "347" | 1 / 8 – 9(diameter) | per 2007 catalog source | |
| stainless | sheetCondition: No. 2D finish, dull cold rolled, annealed and pickled | "347" | .012" (30 Ga.) – .160" (9 Ga.)(thickness) | per 2007 catalog source | |
| stainless | round barCondition: Annealed | "410" | 3 / 16 – 12(diameter) | per 2007 catalog source | |
| stainless | sheetCondition: Annealed and pickled, No. 2D finish, dull cold rolled | "410" | .032" (22 Ga.) – .135" (10 Ga.)(thickness) | per 2007 catalog source | |
| stainless | flat barCondition: Annealed, cold drawn | "416" | Not stated | per 2007 catalog source | |
| stainless | hex barCondition: Annealed and cold drawn, Brinell 241 maximum; or heat treated and cold drawn, Rockwell C 25-32 | "416" | Not stated | per 2007 catalog source | |
| stainless | round barCondition: Condition A, annealed | "418" | 1 / 4 – 5(diameter) | per 2007 catalog source | |
| stainless | round barCondition: Annealed | "440C" | 1 / 8 – 10(diameter) | per 2007 catalog source | |
| stainless | round barCondition: Condition A or hardened | "17-4" | 3 / 32 – 12(diameter) | per 2007 catalog source | |
| stainless | square barCondition: Cold drawn and hot rolled, annealed and pickled | "17-4" | 1 / 4 – 6(width) | per 2007 catalog source | |
| stainless | flat barCondition: Hot rolled, annealed and pickled | "17-4" | Not stated | per 2007 catalog source | |
| stainless | plateCondition: Hot rolled, annealed and pickled | "17-4" | 3 / 16 " through 2"(thickness) | per 2007 catalog source | |
| stainless | round barCondition: Condition A | "15-5 VAR" | 1 / 4 – 8(diameter) | per 2007 catalog source | |
| stainless | sheetCondition: Condition A, No. 2D finish, dull cold rolled, annealed and pickled | "17-7" | .0161" (27 Ga.) – .160" (9 Ga.)(thickness) | per 2007 catalog source | |
| alloy steel | plate | "ASTM A 572 Grade 50" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plate | "SAE J410 Grade 950X" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plate | "SAE J410 Grade 950B" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plate | "ASTM A 242 Type 1" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plate | "A588" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plate | "SAE J410 Grade 950D" | 3 / 16 " to 3 1 / 2 "(thickness) | per 2007 catalog source | |
| alloy steel | plateCondition: Quenched and tempered | "ASTM A 514" | 3 / 16 " to 6"(thickness) | per 2007 catalog source | |
| alloy steel | plateCondition: Quenched and tempered | "AR 360" | 1 / 4 " to 1 1 / 2 "(thickness) | per 2007 catalog source | |
| carbon steel | plateCondition: Free-cutting | "J-20" | 1 / 4 " to 6"(thickness) | per 2007 catalog source | |
| carbon steel | plateCondition: Free-cutting | "J-45" | 1 / 4 " to 6"(thickness) | per 2007 catalog source | |
| carbon steel | plateCondition: As-rolled | "1045" | 3 / 16 " to 14"(thickness) | per 2007 catalog source | |
| carbon steel | plateCondition: Hot rolled, pressure vessel quality | "ASTM A 515, Grade 70" | 3 / 16 " to 8"(thickness) | per 2007 catalog source | |
| carbon steel | plateCondition: Hot rolled, pressure vessel quality | "ASTM A 516, Grade 70" | 3 / 16 " to 8"(thickness) | per 2007 catalog source |
Locations (42)
10650 Alameda Street, Lynwood, CA 90262, US
Carretera México-Cuautitlán . KM 32 CIC II. Bodega 14., Cuautitlán, 54759, MX
434 Thomas Parkway, Jefferson, GA 30549, US
133 Ed Gardner Drive, Pell City, AL 35125, US
59 South Street, Hopkinton, MA 01748, US
4015 Westinghouse Boulevard, Charlotte, NC 28273, US
Delivery & Stated Service Areas
No explicit delivery radius or regional service statement listed on website.
Certifications
No quality certificates listed on supplier website.
Ordering Information
- Minimum order
- Not stated on website
- Online store
- Not listed on website
- Company quote form
- Open quote form
Already have a supplier quote in hand? Check if the price is fair.