thyssenkrupp Materials NA
thyssenkrupp Materials NA is a service center with 97 listed US locations in AL, AR, CA, CO, CT and 26 other states, listing aluminum, copper, stainless, bronze and 3 more material families across its published catalog. Published quality certifications include ISO 9001, C-TPAT.
Product Listings
Grades, shapes, and size ranges listed on thyssenkrupp Materials NA's website and published catalogs. Listing an item does not confirm current floor inventory.
round bar · T3; Cold Finished; Cold Finished
Size: 0.125 – 3.75 (diameter)
round bar · T351; Cold Finished; Cold Finished
Size: 0.5 – 8.0 (diameter)
round bar · T4; Cold Finished; Cold Finished
Size: 0.1875 – 8.0 (diameter)
round bar · T651; Cold Finished; Cold Finished
Size: 0.5 – 8.0 (diameter)
round bar · T6511; Extruded; Extruded
Size: 0.25 – 9.0 (diameter)
round bar · T651; Cold Finished; Cold Finished
Size: 0.5 – 8.0 (diameter)
hex bar · T3; Cold Finished
Size: 0.1875 – 1.75 (thickness)
hex bar · T351; Cold Finished
Size: 0.5625 – 2.4375 (thickness)
hex bar · T851; Cold Finished
Size: 0.4375 – 2.8125 (thickness)
hex bar · Cold Finished
Size: 0.75 – 2.625 (across flats)
hex bar · T6511; Extruded
Size: 0.375 – 3.0 (thickness)
hex bar · T6511; Extruded
Size: 0.4375 – 2.5 (thickness)
square bar · T351; Cold Finished
Size: 0.375 – 4.0 (width)
square bar · T6511; Extruded; Manifold Quality
Size: 0.375 – 7.5 (width)
square bar · T651; Cold Finished
Size: 0.875 – 2.5 (width)
flat bar · T351; Cold Finished; Cold Finished
Size: 0.25 – 4 (thickness)
flat bar · T4; Cold Finished; Cold Finished
Size: 0.125 – 0.375 (thickness)
flat bar · T6511; Extruded; Extruded
Size: 0.125 – 6.0 (thickness)
flat bar · T6511; Extruded; Manifold Quality; Extruded, Manifold Quality
Size: 1.0 – 6.0 (thickness)
flat bar · T52; Extruded; Extruded
Size: 0.125 – 1.0 (thickness)
flat bar · T61; Extruded; Bus Bar; Round Edge; Extruded, Full Round Edge Bus Bar; Extruded, Full Round Edge
Size: 0.125 – 1.0 (thickness)
flat bar · T65; Extruded; Bus Bar; Round Edge; Extruded, Full Round Edge Bus Bar; Extruded, Full Round Edge
Size: 0.125 – 0.25 (thickness)
flat bar · T7351; Cold Finished; Cold Finished
Size: 0.5 – 3.0 (thickness)
flat bar · T651; Cold Finished; Cold Finished
Size: 0.5 – 2.5 (thickness)
flat bar · T6511; Extruded; Extruded
Size: 0.5 – 4.0 (thickness)
beam · T6; Extruded; American Standard
Size: 0.17 – 0.494 (depth)
beam · T6; Extruded; Aluminum Association
Size: 0.19 – 0.31 (depth)
angle · T6; Extruded; American Standard
Size: 0.125 – .75 (thickness)
angle · T52; Extruded; Sharp Corner
Size: 0.0625 – 0.25 (thickness)
channel · T6; Extruded; Aluminum Association
Size: 0.13 – 0.35 (depth)
channel · T6; Extruded; American Standard
Size: 0.17 – 0.526 (depth)
round bar
Size: 0.125 – 16.0 (diameter) · product-line range
round bar
Size: 0.1875 – 16.0 (diameter) · product-line range
square bar · Includes Hot Rolled, Annealed and Pickled
flat bar · Includes Hot Rolled, Annealed and Pickled
shape not captured · Plating Rack Stock
Size: 0.037 – 0.125 (thickness)
shape not captured · Rectangular Strip
Size: 0.125 – 0.5 (thickness) · product-line range
coil
Size: 0.018 – 0.179 (thickness) · product-line range
coil
Size: 0.060 – 0.120 (thickness) · product-line range
sheet
Size: 0.018 – 0.179 (thickness) · product-line range
sheet
Size: 0.060 – 0.120 (thickness) · product-line range
plate
Size: 0.1875 – 3.5 (thickness) · product-line range
plate
Size: 0.1875 – 3.5 (thickness) · product-line range
round bar
Size: 0.5 – 1.25 (diameter) · product-line range
round bar · Cold Finished
Size: 0.625 – 6.5 (diameter)
square bar · Cold Finished
Size: 0.375 – 4 (across flats)
square bar · Extruded, Manifold Quality
Size: 1 – 6.5 (across flats)
square bar · Cold Finished
Size: 0.875 – 2.5 (across flats)
square bar · Extruded
Size: 0.375 – 7.5 (across flats)
hex bar · Cold Finished
Size: 0.1875 – 1.75 (across flats)
hex bar · Cold Finished
Size: 0.25 – 0.5 (across flats)
hex bar · Cold Finished
Size: 0.4375 – 2.8125 (across flats)
hex bar · Cold Finished
Size: 0.5625 – 2.4375 (across flats)
hex bar · Extruded
Size: 0.375 – 0.9375 (across flats)
hex bar · Extruded
Size: 0.4375 – 2.5 (across flats)
beam · Extruded, American Standard
Size: 3 – 8 (depth)
beam · Extruded, Aluminum Association
Size: 6 – 12 (depth)
angle · Extruded, American Standard
Size: 0.75 – 8 (leg) · product-line range
channel · Extruded, Aluminum Association
Size: 2 – 12 (depth)
channel · Extruded, American Standard
Size: 3 – 12 (depth)
round tube · Extruded Drawn Seamless
Size: 0.5 – 1.25 (od)
round tube · Extruded Structural
Size: 1.156 – 8 (od)
round tube · Extruded Drawn Seamless
Size: 0.25 – 3 (od)
round tube · Extruded Seamless
Size: 1.375 – 8 (od)
round tube · Extruded Drawn Seamless
Size: 0.75 (od)
round tube · Extruded Structural
Size: 0.75 – 8.5 (od)
square tube · Extruded
Size: 0.5 – 8 (od) · product-line range
square tube · Extruded
Size: 0.75 – 8 (od) · product-line range
coil
Size: 0.016 – 0.125 (thickness) · product-line range
square bar · Cold Drawn
Size: 0.5 – 2 (across flats)
sheet · #2B
Size: (26 ga) .018 x 48 – (7 ga) .179 x 48 (thickness)
plate · Hot Rolled, Annealed and Pickled
Size: 0.1875 – 4 (thickness)
plate · Hot Rolled, Annealed and Pickled
Size: 0.1875 – 3.5 (thickness)
plate · Hot Rolled, Annealed and Pickled
Size: 0.1875 – 3.5 (thickness)
round tube · H58 (drawn-general purpose)
Size: 4 – 6.5 (od)
sheet · O60 (soft anneal)
Size: 0.02 – 0.125 (thickness) · product-line range
coil · O60 (soft anneal)
Size: 0.02 – 0.125 (thickness) · product-line range
coil · H02 (haf-hard)
Size: 0.020 – 0.125 (thickness) · product-line range
flat bar · H02 (half-hard)
Size: 0.0625 – 2.5 (thickness)
flat bar · H02 (half-hard); Silver Flash
Size: 0.1875 – 0.5 (thickness)
sheet · Cold Rolled; 1/8-1/4 Hard
Size: 0.0270 – 0.2500 (thickness)
sheet · H00 (eighth-hard)
Size: 0.0160 – 0.0431 (thickness)
coil · H00 (eighth-hard)
Size: 0.0216 – 0.0323 (thickness)
coil · H01 (quarter-hard)
Size: 0.0200 – 0.1250 (thickness) · product-line range
sheet · H02 (half-hard)
Size: 0.0200 – 0.1870 (thickness)
sheet · O60 (soft anneal)
Size: 0.0216 – 0.1875 (thickness)
coil · Cold Rolled Annealed; O60 (soft anneal)
Size: 0.005 – 0.125 (thickness)
coil · Cold Rolled Annealed; O60 (soft anneal); Tinned
Size: 0.005 (thickness)
plate · Cold Rolled; H01 (quarter-hard)
Size: 0.25 – 1 (thickness)
round tube · Dehydrated & Sealed; O60 (soft anneal)
Size: 0.125 – 0.5 (od) · product-line range
hex bar · H02 (half-hard)
Size: 0.4375 – 0.75 (across flats)
plate · Cold Rolled; H (Hard - TD04)
Size: 0.25 – 1 (thickness)
round bar · Cold Drawn Annealed; A (solution annealed - TB00)
Size: 0.998 – 2.5 (diameter)
round bar · AT-T (Heat treated and turned)
Size: 2.5 – 4 (diameter)
round bar · H (Hard - TD04)
Size: 0.0625 – 1.5 (diameter)
plate · AT (Heat treated - TF00)
Size: 0.5 – 4 (thickness)
round bar · AT (Heat treated - TF00)
Size: 0.75 – 3.5 (diameter)
round bar · Cold Drawn (Heat Treated - TH04)
Size: 0.75 (diameter) · product-line range
round bar · H04 (hard)
Size: 0.062 – 0.625 (diameter)
round tube · H58 (drawn-general purpose)
Size: 0.125 – 2.75 (od)
round tube · H58 (drawn-general purpose)
Size: 0.375 – 4 (od)
shape not captured · 3/4 Hard, Rounded Edge
Size: 0.037 – 0.125 (thickness)
shape not captured · Edge Conditioned
Size: 0.125 – 0.5 (thickness)
plate · Includes Cast Tooling Plate
| Material | Shape | Supplier Lists Grades | Stated Size Range | Source | Report availability |
|---|---|---|---|---|---|
| aluminum | round barCondition: T3; Cold Finished; Cold Finished | "2011-T3" | 0.125 – 3.75(diameter) | line card / list source | |
| aluminum | round barCondition: T351; Cold Finished; Cold Finished | "2024-T351" | 0.5 – 8.0(diameter) | line card / list source | |
| aluminum | round barCondition: T4; Cold Finished; Cold Finished | "2024-T4" | 0.1875 – 8.0(diameter) | line card / list source | |
| aluminum | round barCondition: T651; Cold Finished; Cold Finished | "6061-T651" | 0.5 – 8.0(diameter) | line card / list source | |
| aluminum | round barCondition: T6511; Extruded; Extruded | "6061-T6511" | 0.25 – 9.0(diameter) | line card / list source | |
| aluminum | round barCondition: T651; Cold Finished; Cold Finished | "7075-T651" | 0.5 – 8.0(diameter) | line card / list source | |
| aluminum | hex barCondition: T3; Cold Finished | "2011-T3" | 0.1875 – 1.75(thickness) | product page source | |
| aluminum | hex barCondition: T351; Cold Finished | "2024-T351" | 0.5625 – 2.4375(thickness) | product page source | |
| aluminum | hex barCondition: T4; Cold Finished | "2024-T4" | 0.25 – 0.5(thickness) | product page source | |
| aluminum | hex barCondition: T851; Cold Finished | "2024-T851" | 0.4375 – 2.8125(thickness) | product page source | |
| aluminum | hex barCondition: Cold Finished | "6061-T651" | 0.75 – 2.625(across flats) | line card / list source | |
| aluminum | hex barCondition: T6511; Extruded | "6061-T6511" | 0.375 – 3.0(thickness) | product page source | |
| aluminum | hex barCondition: T6511; Extruded | "6262-T6511" | 0.4375 – 2.5(thickness) | product page source | |
| aluminum | square barCondition: T351; Cold Finished | "2024-T351" | 0.375 – 4.0(width) | product page source | |
| aluminum | square barCondition: Extruded | "6061-T6" | 0.25 – 8(across flats) | line card / list source | |
| aluminum | square barCondition: T6511; Extruded | "6061-T6511" | 1.0 – 6.5(width) | product page source | |
| aluminum | square barCondition: T6511; Extruded; Manifold Quality | "6061-T6511" | 0.375 – 7.5(width) | product page source | |
| aluminum | square barCondition: T651; Cold Finished | "7075-T651" | 0.875 – 2.5(width) | product page source | |
| aluminum | flat barCondition: T351; Cold Finished; Cold Finished | "2024-T351" | 0.25 – 4(thickness) | line card / list source | |
| aluminum | flat barCondition: T4; Cold Finished; Cold Finished | "2024-T4" | 0.125 – 0.375(thickness) | line card / list source | |
| aluminum | flat barCondition: T6511; Extruded; Extruded | "6061-T6511" | 0.125 – 6.0(thickness) | line card / list source | |
| aluminum | flat barCondition: T6511; Extruded; Manifold Quality; Extruded, Manifold Quality | "6061-T6511" | 1.0 – 6.0(thickness) | line card / list source | |
| aluminum | flat barCondition: T52; Extruded; Extruded | "6063-T52" | 0.125 – 1.0(thickness) | line card / list source | |
| aluminum | flat barCondition: T61; Extruded; Bus Bar; Round Edge; Extruded, Full Round Edge Bus Bar; Extruded, Full Round Edge | "6101-T61" | 0.125 – 1.0(thickness) | line card / list source | |
| aluminum | flat barCondition: T65; Extruded; Bus Bar; Round Edge; Extruded, Full Round Edge Bus Bar; Extruded, Full Round Edge | "6101-T65" | 0.125 – 0.25(thickness) | line card / list source | |
| aluminum | flat barCondition: T7351; Cold Finished; Cold Finished | "7075-T7351" | 0.5 – 3.0(thickness) | line card / list source | |
| aluminum | flat barCondition: T651; Cold Finished; Cold Finished | "7075-T651" | 0.5 – 2.5(thickness) | line card / list source | |
| aluminum | flat barCondition: T6511; Extruded; Extruded | "7075-T6511" | 0.5 – 4.0(thickness) | line card / list source | |
| aluminum | beamCondition: T6; Extruded; American Standard | "6061-T6" | 0.17 – 0.494(depth) | product page source | |
| aluminum | beamCondition: T6; Extruded; Aluminum Association | "6061-T6" | 0.19 – 0.31(depth) | product page source | |
| aluminum | angleCondition: T6; Extruded; American Standard | "6061-T6" | 0.125 – .75(thickness) | product page source | |
| aluminum | angleCondition: T52; Extruded; Sharp Corner | "6063-T52" | 0.0625 – 0.25(thickness) | product page source | |
| aluminum | channelCondition: T6; Extruded; Aluminum Association | "6061-T6" | 0.13 – 0.35(depth) | product page source | |
| aluminum | channelCondition: T6; Extruded; American Standard | "6061-T6" | 0.17 – 0.526(depth) | product page source | |
| aluminum | channelCondition: T52; Extruded | "6063-T52" | 0.09 – 0.25(depth) | product page source | |
| aluminum | plate | "tk Ultra 7 Mold Plate®" | 1.000" to 20.000"(thickness) | product page source | |
| nickel alloy | round barCondition: Annealed | "718" | 0.5" – 11.0"(diameter) | product page source | |
| stainless | round bar | "302" | 0.0625 – 0.1875(diameter) | product page source | |
| stainless | round bar | "303" | 0.0625 – 16.0(diameter) | product page source | |
| stainless | round bar | "304", "304L" | 0.125 – 16.0(diameter)Product-line range across grades | product page source | |
| stainless | round bar | "316", "316L" | 0.1875 – 16.0(diameter)Product-line range across grades | product page source | |
| stainless | round bar | "321" | 0.375 – 6.0(diameter) | product page source | |
| stainless | round bar | "410" | 0.375 – 5.5(diameter) | product page source | |
| stainless | round bar | "416" | 0.125 – 9.0(diameter) | product page source | |
| stainless | round bar | "440C" | 0.3125 – 8.5(diameter) | product page source | |
| stainless | round bar | "455" | 0.1875 – 1.0(diameter)Product-line range across grades | product page source | |
| stainless | round bar | "13-8" | 0.625 – 8.0(diameter) | product page source | |
| stainless | round bar | "15-5" | 0.25 – 8.5(diameter) | product page source | |
| stainless | round bar | "17-4" | 0.0937 – 13.0(diameter) | product page source | |
| stainless | round bar | "Nitronic 50" | 0.75 – 6.0(diameter) | product page source | |
| stainless | round bar | "Nitronic 60" | 0.75 – 7.5(diameter) | product page source | |
| stainless | square bar | "303" | 0.1875 – 2.0(width) | product page source | |
| stainless | square barCondition: Includes Hot Rolled, Annealed and Pickled | "304", "304L" | Not stated | line card / list source | |
| stainless | square bar | "17-4" | 1.0 – 3.5(width) | product page source | |
| stainless | flat barCondition: Includes Hot Rolled, Annealed and Pickled | "304", "304L" | Not stated | line card / list source | |
| stainless | hex bar | "303" | 0.1875 – 3.0(across flats) | product page source | |
| stainless | hex barCondition: Includes Cold Drawn | "304", "304L" | Not stated | line card / list source | |
| stainless | hex barCondition: Includes Cold Drawn | "316", "316L" | Not stated | line card / list source | |
| stainless | hex bar | "321" | 0.375 – 2.0(across flats) | product page source | |
| stainless | hex bar | "347" | 0.4375 – 1.5(across flats) | product page source | |
| stainless | hex barCondition: Includes Cold Drawn | "416" | Not stated | line card / list source | |
| stainless | shape not capturedCondition: Plating Rack Stock | "301" | 0.037 – 0.125(thickness) | product page source | |
| stainless | shape not capturedCondition: Rectangular Strip | "304", "304L" | 0.125 – 0.5(thickness)Product-line range across grades | product page source | |
| stainless | coil | "304", "304L" | 0.018 – 0.179(thickness)Product-line range across grades | product page source | |
| stainless | coil | "316", "316L" | 0.060 – 0.120(thickness)Product-line range across grades | product page source | |
| stainless | sheet | "304", "304L" | 0.018 – 0.179(thickness)Product-line range across grades | product page source | |
| stainless | sheet | "316", "316L" | 0.060 – 0.120(thickness)Product-line range across grades | product page source | |
| stainless | plate | "303" | 0.1875 – 4.0(thickness) | product page source | |
| stainless | plate | "304", "304L" | 0.1875 – 3.5(thickness)Product-line range across grades | product page source | |
| stainless | plate | "316", "316L" | 0.1875 – 3.5(thickness)Product-line range across grades | product page source | |
| stainless | plateCondition: Includes Hot Rolled, Annealed and Pickled | "17-4" | Not stated | line card / list source | |
| copper | round bar | "C18150" | 0.5 – 1.25(diameter)Product-line range across grades | line card / list source | |
| copper | square bar | "C18200" | 0.5 – 2(width) | line card / list source | |
| copper | flat barCondition: Includes H02 (half-hard) | "C10100" | Not stated | line card / list source | |
| copper | flat barCondition: Includes H02 (half-hard); Tinned | "C11000" | Not stated | line card / list source | |
| copper | flat barCondition: Includes H02 (half-hard) | "C14500" | Not stated | line card / list source | |
| copper | flat bar | "C18200" | 0.5 – 1.5(thickness) | line card / list source | |
| copper | hex bar | "C18200" | Not stated | line card / list source | |
| copper | round tubeCondition: Includes H58 (drawn-general purpose) | "C12200" | Not stated | line card / list source | |
| copper | plateCondition: Includes H04 (hard) | "C10100" | Not stated | line card / list source | |
| copper | plate | "C18200" | 0.25 – 4(thickness) | line card / list source | |
| brass | hex bar | "C31400" | Not stated | line card / list source | |
| bronze | round bar | "C51000" | Not stated | product page source | |
| bronze | round bar | "C5400" | Not stated | product page source | |
| bronze | round bar | "C62300" | Not stated | product page source | |
| bronze | round bar | "C62400" | Not stated | product page source | |
| bronze | round bar | "C62500" | Not stated | product page source | |
| bronze | round bar | "C63000" | Not stated | product page source | |
| bronze | round bar | "C603020" | Not stated | product page source | |
| bronze | round bar | "C64200" | Not stated | product page source | |
| bronze | round bar | "C6500" | Not stated | product page source | |
| bronze | round bar | "C67300" | Not stated | product page source | |
| bronze | round bar | "C67500" | Not stated | product page source | |
| bronze | round bar | "C67600" | Not stated | product page source | |
| bronze | round bar | "C86300" | Not stated | product page source | |
| bronze | round bar | "C93200" | Not stated | product page source | |
| bronze | round bar | "C95400" | Not stated | product page source | |
| bronze | sheetCondition: Grade A; H08 (spring) | "C51000" | Not stated | product page source | |
| bronze | coilCondition: Grade A; H08 (spring) | "C51000" | Not stated | product page source | |
| plastic | shape not statedCondition: Machine Grade | "Polycarbonate" | Not stated | product page source | |
| plastic | shape not stated | "Acrylic" | Not stated | product page source | |
| aluminum | round barCondition: Cold Finished | "7075-T7351" | 0.625 – 6.5(diameter) | line card / list source | |
| aluminum | square barCondition: Cold Finished | "2024-T351" | 0.375 – 4(across flats) | line card / list source | |
| aluminum | square barCondition: Extruded, Manifold Quality | "6061-T6511" | 1 – 6.5(across flats) | line card / list source | |
| aluminum | square barCondition: Cold Finished | "7075-T651" | 0.875 – 2.5(across flats) | line card / list source | |
| aluminum | square barCondition: Extruded | "6061-T6511" | 0.375 – 7.5(across flats) | line card / list source | |
| aluminum | hex barCondition: Cold Finished | "2011-T3" | 0.1875 – 1.75(across flats) | line card / list source | |
| aluminum | hex barCondition: Cold Finished | "2024-T4" | 0.25 – 0.5(across flats) | line card / list source | |
| aluminum | hex barCondition: Cold Finished | "2024-T851" | 0.4375 – 2.8125(across flats) | line card / list source | |
| aluminum | hex barCondition: Cold Finished | "2024-T351" | 0.5625 – 2.4375(across flats) | line card / list source | |
| aluminum | hex barCondition: Extruded | "6061-T6" | 0.375 – 0.9375(across flats) | line card / list source | |
| aluminum | hex barCondition: Extruded | "6061-T6511" | 0.4375 – 3(across flats) | line card / list source | |
| aluminum | hex barCondition: Extruded | "6262-T6511" | 0.4375 – 2.5(across flats) | line card / list source | |
| aluminum | beamCondition: Extruded, American Standard | "6061-T6" | 3 – 8(depth) | line card / list source | |
| aluminum | beamCondition: Extruded, Aluminum Association | "6061-T6" | 6 – 12(depth) | line card / list source | |
| aluminum | angleCondition: Extruded, Sharp Corner | "6063-T52" | 0.5 – 4(leg) | line card / list source | |
| aluminum | angleCondition: Extruded, American Standard | "6061-T6" | 0.75 – 8(leg)Product-line range across grades | line card / list source | |
| aluminum | channelCondition: Extruded, Aluminum Association | "6061-T6" | 2 – 12(depth) | line card / list source | |
| aluminum | channelCondition: Extruded, American Standard | "6061-T6" | 3 – 12(depth) | line card / list source | |
| aluminum | channelCondition: Extruded | "6063-T52" | 0.75 – 4(depth) | line card / list source | |
| aluminum | round tubeCondition: Extruded Seamless | "1100-F" | 0.5(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Drawn Seamless | "2024-T3" | 0.5 – 1.25(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Drawn | "3003-H14" | 0.25 – 0.4375(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Structural | "6061-T6511" | 1.156 – 8(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Drawn Seamless | "6061-T6" | 0.25 – 3(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Seamless | "6061-T6511" | 1.375 – 8(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Drawn Seamless | "6063-T832" | 0.75(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded | "6063-T6" | 0.54 – 4.5(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded | "6063-T52" | 1.5 – 6(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Seamless | "6061-T6" | 2.5 – 14.25(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Structural | "6061-T6" | 0.75 – 8.5(od) | line card / list source | |
| aluminum | round tubeCondition: Extruded Seamless | "6262-T6511" | 1.375(od) | line card / list source | |
| aluminum | square tubeCondition: Extruded | "6063-T52" | 0.5 – 8(od)Product-line range across grades | line card / list source | |
| aluminum | square tubeCondition: Extruded | "6061-T6" | 0.75 – 8(od)Product-line range across grades | line card / list source | |
| aluminum | pipeCondition: Extruded Seamless, Schedule 40 | "6061-T6" | 0.25 – 6 | line card / list source | |
| aluminum | sheet | "1100-O" | 0.032 – 0.19(thickness) | line card / list source | |
| aluminum | sheet | "1100-H14" | 0.032 – 0.125(thickness) | line card / list source | |
| aluminum | coil | "1100-H14" | 0.19 – 0.249(thickness) | line card / list source | |
| aluminum | coil | "3003-H14" | 0.016 – 0.063(thickness) | line card / list source | |
| aluminum | sheet | "3003-O" | 0.032 – 0.125(thickness) | line card / list source | |
| aluminum | coil | "5052-H32" | 0.016 – 0.125(thickness)Product-line range across grades | line card / list source | |
| stainless | square barCondition: Cold Drawn | "303" | 0.1875 – 2(across flats) | line card / list source | |
| stainless | square barCondition: Cold Drawn | "316", "316L" | 0.5 – 2(across flats) | line card / list source | |
| stainless | hex barCondition: Cold Drawn | "303" | Not stated | line card / list source | |
| stainless | hex barCondition: Cold Drawn | "321" | Not stated | line card / list source | |
| stainless | sheetCondition: #2B | "304" | (26 ga) .018 x 48 – (7 ga) .179 x 48(thickness) | line card / list source | |
| stainless | plateCondition: Hot Rolled, Annealed and Pickled | "303" | 0.1875 – 4(thickness) | line card / list source | |
| stainless | plateCondition: Hot Rolled, Annealed and Pickled | "304L" | 0.1875 – 3.5(thickness) | line card / list source | |
| stainless | plateCondition: Hot Rolled, Annealed and Pickled | "316L" | 0.1875 – 3.5(thickness) | line card / list source | |
| copper | shape not capturedCondition: Cast | "C10100" | 8 – 9(diameter) | line card / list source | |
| copper | square barCondition: H02 (half-hard) | "C10100" | 0.375 – 2(width) | line card / list source | |
| copper | rodCondition: H04 (hard) | "C10200" | 0.875 – 4.5(diameter) | line card / list source | |
| copper | wireCondition: O60 (soft anneal) | "C10200" | 0.312 – 0.875(diameter) | line card / list source | |
| copper | round tubeCondition: H80 (hard-drawn) | "C10100" | 0.125 – 4(od) | line card / list source | |
| copper | round tubeCondition: H58 (drawn-general purpose) | "C10100" | 4 – 6.5(od) | line card / list source | |
| copper | pipeCondition: H80 (hard-drawn) | "C10200" | .5 – 2.5 | line card / list source | |
| copper | sheetCondition: O60 (soft anneal) | "C10100" | 0.02 – 0.125(thickness)Product-line range across grades | line card / list source | |
| copper | coilCondition: O60 (soft anneal) | "C10100" | 0.02 – 0.125(thickness)Product-line range across grades | line card / list source | |
| copper | sheetCondition: H02 (half-hard) | "C10100" | 0.01 – 0.125(thickness) | line card / list source | |
| copper | coilCondition: H02 (half-hard) | "C10100" | 0.05 – 0.156(thickness) | line card / list source | |
| copper | plateCondition: H02 (half-hard) | "C10100" | 0.19 – 1(thickness) | line card / list source | |
| copper | plateCondition: M20 (as hot rolled) | "C10100" | 1.25 – 4(thickness) | line card / list source | |
| copper | coilCondition: O60 (soft anneal) | "C10200" | 0.025 – 0.15(thickness) | line card / list source | |
| copper | coilCondition: H02 (haf-hard) | "C10200" | 0.020 – 0.125(thickness)Product-line range across grades | line card / list source | |
| copper | square barCondition: H02 (half-hard) | "C11000" | 0.375 – 3(width) | line card / list source | |
| copper | wireCondition: O60 (soft anneal) | "C11000" | 0.0201 – 0.25(diameter) | line card / list source | |
| copper | flat barCondition: H02 (half-hard) | "C11000" | 0.0625 – 2.5(thickness) | line card / list source | |
| copper | flat barCondition: H02 (half-hard); Silver Flash | "C11000" | 0.1875 – 0.5(thickness) | line card / list source | |
| copper | sheetCondition: Cold Rolled; 1/8-1/4 Hard | "C11000" | 0.0270 – 0.2500(thickness) | line card / list source | |
| copper | sheetCondition: H00 (eighth-hard) | Grade not listed | 0.0160 – 0.0431(thickness) | line card / list source | |
| copper | coilCondition: H00 (eighth-hard) | Grade not listed | 0.0216 – 0.0323(thickness) | line card / list source | |
| copper | coilCondition: H01 (quarter-hard) | "C11000" | 0.0200 – 0.1250(thickness)Product-line range across grades | line card / list source | |
| copper | sheetCondition: H02 (half-hard) | "C11000" | 0.0200 – 0.1870(thickness) | line card / list source | |
| copper | coilCondition: H02 (half-hard) | "C11000" | 0.0100 – 0.1560(thickness) | line card / list source | |
| copper | sheetCondition: O60 (soft anneal) | "C11000" | 0.0216 – 0.1875(thickness) | line card / list source | |
| copper | coilCondition: Cold Rolled Annealed; O60 (soft anneal) | "C11000" | 0.005 – 0.125(thickness) | line card / list source | |
| copper | coilCondition: Cold Rolled Annealed; O60 (soft anneal); Tinned | "C11000" | 0.005(thickness) | line card / list source | |
| copper | plateCondition: Cold Rolled; H01 (quarter-hard) | "C11000" | 0.25 – 1(thickness) | line card / list source | |
| copper | plateCondition: M20 (as hot rolled) | "C11000" | 1.25 – 5(thickness) | line card / list source | |
| copper | round tubeCondition: Dehydrated & Sealed; O60 (soft anneal) | "C12200" | 0.125 – 0.5(od)Product-line range across grades | line card / list source | |
| copper | round tubeCondition: O60 (soft anneal) | "C12200" | 0.1562 – 8.125(od) | line card / list source | |
| copper | pipeCondition: H80 (hard-drawn) | "C12200" | .125 – 2 | line card / list source | |
| copper | round tubeCondition: H80 (hard-drawn) | "C12200" | 1.75 – 2.75(od) | line card / list source | |
| copper | round tubeCondition: H55 (light-drawn) | "C12200" | 0.375(od) | line card / list source | |
| copper | sheetCondition: Cold Rolled | "C12200" | 0.0216 – 0.064(thickness) | line card / list source | |
| copper | rodCondition: H02 (half-hard) | "C14500" | 0.1875 – 4(diameter) | line card / list source | |
| copper | flat barCondition: H04 (hard) | "C14500" | 0.25 – 3(thickness) | line card / list source | |
| copper | hex barCondition: H02 (half-hard) | "C14500" | 0.4375 – 0.75(across flats) | line card / list source | |
| copper | hex barCondition: H04 (hard) | "C14500" | 0.391 – 2.5(across flats) | line card / list source | |
| copper | rodCondition: H02 (half-hard) | "C14700" | 0.5 – 1.75(diameter) | line card / list source | |
| copper | plateCondition: Cold Rolled; H (Hard - TD04) | "Alloy 25" | 0.25 – 1(thickness) | line card / list source | |
| copper | round barCondition: HT (TH04) | "C17510" | 0.3125 – 2.25(diameter) | line card / list source | |
| copper | round barCondition: Cold Drawn Annealed; A (solution annealed - TB00) | "C17510" | 0.998 – 2.5(diameter) | line card / list source | |
| copper | round barCondition: AT-T (Heat treated and turned) | "C17510" | 2.5 – 4(diameter) | line card / list source | |
| copper | square barCondition: HT (TH04) | "C17510" | 0.75 – 1(width) | line card / list source | |
| copper | flat barCondition: HT (TH04) | "C17510" | 0.25 – 1.5(thickness) | line card / list source | |
| copper | hex barCondition: HT (TH04) | "C17510" | 1.25(across flats) | line card / list source | |
| copper | round barCondition: H (Hard - TD04) | "C17300" | 0.0625 – 1.5(diameter) | line card / list source | |
| copper | plateCondition: AT (Heat treated - TF00) | "C18000" | 0.5 – 4(thickness) | line card / list source | |
| copper | plateCondition: AT (Heat treated - TF00) | "C17510" | 2 – 3(thickness) | line card / list source | |
| copper | plateCondition: HT (TH04) | "C17510" | 0.25 – 1.75(thickness) | line card / list source | |
| copper | round barCondition: AT (Heat treated - TF00) | "C18000" | 0.75 – 3.5(diameter) | line card / list source | |
| copper | round barCondition: Cold Drawn (Heat Treated - TH04) | "C18000" | 0.75(diameter)Product-line range across grades | line card / list source | |
| copper | round bar | "C18200" | 0.3125 – 3(diameter) | line card / list source | |
| copper | round barCondition: H04 (hard) | "C18700" | 0.125 – 1(diameter) | line card / list source | |
| copper | round barCondition: H04 (hard) | "C19160 (K41)" | 0.062 – 0.625(diameter) | line card / list source | |
| copper | square barCondition: H04 (hard) | "C18700" | 0.5(width) | line card / list source | |
| brass | coilCondition: O60 (soft anneal) | "C21000" | 0.064 – 0.125(thickness) | line card / list source | |
| brass | coilCondition: O60 (soft anneal) | "C23000" | 0.008 – 0.125(thickness) | line card / list source | |
| brass | round tubeCondition: H58 (drawn-general purpose) | "C26000" | 0.125 – 2.75(od) | line card / list source | |
| brass | sheetCondition: H02 (half-hard) | "C26000" | 0.016 – 0.188(thickness) | line card / list source | |
| brass | round tubeCondition: H58 (drawn-general purpose) | "C27200" | 0.375 – 4(od) | line card / list source | |
| brass | round barCondition: H02 (half hard) | "C27450" | 0.75 – 1.75(diameter) | line card / list source | |
| stainless | shape not capturedCondition: 3/4 Hard, Rounded Edge | "301" | 0.037 – 0.125(thickness) | line card / list source | |
| stainless | shape not capturedCondition: Edge Conditioned | "304", "304L" | 0.125 – 0.5(thickness) | line card / list source | |
| brass | round barCondition: H02 (half hard) | "C31400" | 0.25 – 2.125(diameter) | line card / list source | |
| aluminum | plateCondition: Includes Cast Tooling Plate | Lists aluminum plateGrade and sizes not listed on website | Not stated | line card / list source |
Locations (97)
9451 45th Ave NW, Edmonton, AB T6E-6B9, CA
19044 95A Ave, Surrey, BC V4N 4P2, CA
1467 Mustang Place, Port Coquitlam, BC V3C 6L2, CA
2821 Langstaff Rd, Concord, ON L4K 5C6, CA
2491 Ouellette Ave, Windsor, ON N8X 1L5, CA
4155 Walker Rd, Windsor, ON N8W 3T6, CA
Delivery & Stated Service Areas
Supplier website mentions company delivery trucks / fleet.
No explicit delivery radius or regional service statement listed on website.
Certifications
Ordering Information
- Minimum order
- "For small quantity orders, you can purchase materials, no minimum required, from OnlineMetals here." source
- Online store
- yes
- Company quote form
- Open quote form
Already have a supplier quote in hand? Check if the price is fair.