Copper Suppliers & Grades
C110 electrolytic tough pitch, C101/C102 oxygen-free, C122, C145 tellurium, C172 beryllium, and C706/C715 copper-nickel bus bar, rod, sheet, and tube.
Copper quotes track COMEX/LME cathode plus mill fabrication extras. Electrical fabricators buy C110 silver-plated or bare bus bar from electrical/non-ferrous houses, CNC turners seek out C145 tellurium rod to avoid gummy pure-copper chips, and vacuum/defense shops source certified C101 and C172 from specialty depots.
Copper Grades & Trade Names
18150
Live pricesChromium copper (99% copper, 1% chromium). Precipitation-hardenable to moderate strength (60 – 70 KSI tensile) while retaining about 80% of pure copper's electrical conductivity. The go-to alloy for resistance welding electrodes and applications requiring the combination of strength, conductivity, and heat resistance. Machines better than pure copper in the hardened condition since the chromium gives chips more body. No beryllium toxicity concerns. Compare to 17510 beryllium copper (much stronger but toxic dust) and C110 (softer, higher conductivity, no heat resistance).
B370
Live pricesA commercial bronze specification covering copper-zinc alloys in sheet and strip form. Typically refers to C220 (90/10 commercial bronze). Used for weatherstripping, hardware, and decorative applications. See 220 in the Bronze section for alloy details.
C101 Oxygen-Free
Live pricesOxygen-free electronic copper (99.99% pure, OFE grade). The highest-purity commercial copper. Zero oxygen content eliminates hydrogen embrittlement risk during brazing or welding in reducing atmospheres. Used for high-vacuum components, electron tubes, superconductor substrates, and ultra-high-purity applications. Electrical conductivity is 101% IACS. Machines the same as C110 - gummy, soft, and requires the same tricks: sharp uncoated positive-rake tools, high speed, flood coolant. Costs significantly more than C110 due to the extra refining. If the application doesn't specifically need oxygen-free copper, C110 saves real money. Compare to C110 (99.9% pure, adequate for most electrical applications) and C102 (same thing, different spec number).
C102 Oxygen-Free
Sourcing guideOxygen-free copper (UNS C10200 / CDA 102; 99.95% min copper). Standard oxygen-free grade sitting just below ultra-pure C10100 OFE, offering 101% IACS conductivity without hydrogen embrittlement during vacuum brazing or electron-beam welding. Machines like C110: soft and gummy, requiring sharp uncoated positive-rake tooling.
C110
Live prices99.9% pure copper. The highest electrical conductivity of any common commercial metal (101% IACS), which is why it's the standard for bus bars, electrical connectors, and power distribution components. Machining it is a different story. It's gummy, soft, and wants to stick to everything. Chips don't break, tools load up, and drilled holes tend to mushroom at the edges. The tricks: use sharp, uncoated, positive-rake tooling (aluminum-specific inserts work well), spin fast with high feed rates but light depth of cut, and flood the coolant - oil-based at 10%+ works best. H02 (half-hard) temper machines significantly better than dead soft. Tapping is the worst part; use form taps. If you don't need maximum conductivity and can spec C145 (tellurium copper) instead, it machines much better at only a small conductivity tradeoff. But if the print says C110, there's usually an electrical reason.
C122 DHP Copper
Live pricesPhosphorus-deoxidized copper (99.9% copper, 0.02% phosphorus). The phosphorus removes dissolved oxygen, making this the standard copper for brazing and welding applications where C110's residual oxygen would cause embrittlement. Electrical conductivity drops to about 85% IACS due to the phosphorus - a meaningful penalty for electrical applications but irrelevant for plumbing, heat exchangers, and gaskets. Machines the same as C110 (badly). Used for plumbing tube, heat exchanger tubing, and any brazed copper assembly. Compare to C110 (better conductivity, can't braze in reducing atmospheres) and C101 (oxygen-free, highest conductivity).
C145 Tellurium Copper
Live pricesTellurium copper (99.5% copper, 0.5% tellurium). The best-machining copper alloy, period. Machinability rating is around 85 versus about 20 for C110. Tellurium breaks chips into short, clean fragments instead of the bird's-nest razor wire you get with pure copper. Surface finish is dramatically better. Tool life doubles or triples. Electrical conductivity is 93% IACS - a small tradeoff for massive machinability gains. If your part needs copper and gets machined, C145 should be your first choice unless the 7% conductivity loss or the tellurium content is a deal-breaker. Used for electrical connectors, motor parts, fasteners, and anything turned from copper bar. Compare to C110 (higher conductivity, miserable to machine) and C360 brass (even better machinability but completely different conductivity).
C172 Beryllium Copper
Sourcing guideBeryllium copper Alloy 25 (UNS C17200; ~1.9% beryllium). The highest-strength copper alloy available, age-hardening up to 190 – 200+ KSI tensile (HRC 38 – 44) while keeping non-sparking, non-magnetic, and conductive properties. Standard for downhole oilfield MWD collars, aerospace bushings, injection-mold cores, and RF contacts. Machine in Condition A/H before aging, and use wet flood coolant and extraction because airborne beryllium dust is a severe inhalation hazard.
C175 Cobalt-Beryllium Copper
Sourcing guideHigh-conductivity cobalt-beryllium copper (UNS C17500 / Alloy 10; ~2.5% cobalt, 0.5% beryllium). Trades peak tensile strength (100 – 130 KSI) for higher thermal and electrical conductivity (45~60% IACS) in spot-welding tips, seam-welding wheels, and plastic mold inserts. Observe full beryllium wet-machining dust controls.
C182 Chromium Copper
Live pricesSemi-red brass or low-brass rod (about 80% copper, 20% zinc). A general-purpose copper alloy that bridges the gap between pure copper and true brass. Better machinability than pure copper thanks to the zinc content, though still not free-cutting. Good corrosion resistance and a warm reddish color. Used for architectural hardware, musical instrument components, and decorative parts. Compare to C230 red brass (85/15, richer copper color) and C260 cartridge brass (70/30, more yellow, better formability).
C194 Copper
Sourcing guideHigh-strength modified iron-copper strip alloy (UNS C19400; 97.5% copper, 2.35% iron, 0.12% zinc). Primarily supplied as precision strip and sheet for semiconductor leadframes, electrical terminals, and EMI shielding where higher spring strength than C110 is needed while keeping ~65% IACS conductivity.
C706 Copper-Nickel 90/10
Sourcing guide90/10 copper-nickel (UNS C70600 / CDA 706; 88.6% copper, 10% nickel, 1.4% iron). Workhorse marine seawater piping, heat-exchanger tube, and condenser plate alloy with natural biofouling and erosion-corrosion resistance. Easier to form, weld, and machine than 70/30 C71500, and lower cost.
C715 Copper-Nickel 70/30
Live pricesCopper-nickel 70/30 (70% copper, 30% nickel). The premium marine copper alloy. Outstanding resistance to seawater corrosion, biofouling, and stress corrosion cracking. This is condenser tube material, desalination equipment material, and offshore platform piping material. Machines harder than pure copper - the nickel makes it tougher and more work-hardening. Use carbide at moderate speeds with positive rake and flood coolant. Not as gummy as C110 since the nickel gives the chips more body. Compare to C110 (better conductivity, terrible marine corrosion resistance) and C464 naval brass (cheaper, adequate for less demanding marine applications).
C17510 Beryllium Copper
Live pricesBeryllium copper (CDA 175, 96.7% copper, 2% beryllium, 0.3% cobalt). Precipitation-hardens to extremely high strength (up to 200 KSI tensile) while retaining good conductivity. The strongest copper alloy commercially available. Used for springs, electrical connectors, non-sparking tools, mold inserts, and resistance welding electrodes. Machine it in the annealed condition - it's reasonable before aging. After age-hardening it's very tough on tools. Safety note: beryllium dust is highly toxic. Requires proper ventilation and dust collection during machining. Never dry-machine or grind without respiratory protection. Compare to C110 (much weaker, safe to machine) and 17-4 PH stainless (similar hardening concept, no toxicity concern).
ROOFING COPPER
Live pricesSoft-temper copper sheet used for roofing, flashing, gutters, and architectural metalwork. Not a machining material. It's designed to be formed, bent, and soldered, not cut on a CNC. Typically 16 oz or 20 oz weight (which refers to ounces per square foot, not thickness - 16 oz is about .0216" thick). It develops the green patina over time that you see on old buildings. If this shows up in your shop, someone is fabricating it with shears, brakes, and hand tools, not putting it in a mill.
US Suppliers That List Copper
Showing 5 of 25 suppliers in our directory. Filter by grade, shape, and ship-to state in Supplier Search.
How Shop Buyers Choose a Copper Grade
Quick side-by-side reference for common forms, shop applications, and purchasing pitfalls before you send out quotes.
| Grade | Typical Forms & Sizes | Best Shop Fit | What to Watch Out For |
|---|---|---|---|
| C110 (ETP Bus Bar Copper) | Radius- & square-edge flat bus bar (12 ft), round rod, sheet, plate | Switchgear bus bars, ground straps, transformer lugs, RF shields, and heatsinks | Dead-gummy to drill/tap (use form taps & H02/H04 temper) and embrittles if hydrogen-brazed |
| C101 & C102 (Oxygen-Free) | Certified rod, plate, sheet, and vacuum flange blanks | Ultra-high-vacuum chambers, particle accelerators, klystrons, and reducing-gas brazing | C10100 OFE (99.99% + ASTM F68 Class grade) carries a steep premium over C110; don't spec it for ambient bus bars |
| C145 (Tellurium Copper) | Half-hard H02 round and hex rod (12 ft) | CNC-turned welding tips, plasma nozzles, high-current pins, and threaded studs | Drops conductivity slightly (~93% IACS vs 101% on C110) in exchange for ~4x faster, clean-chip machining |
| C182 (Chromium Copper) | RWMA Class 2 round, hex, and rectangular bar & plate | Resistance spot-welding electrodes, mold cooling cores, and high-temp current jaws | Verify precipitation age-hardened condition (~80% IACS, ~65 KSI tensile) vs unaged stock |
| C172 (Beryllium Copper Alloy 25) | Condition A/H rod, tube, plate, and precision spring strip | Downhole MWD collars, non-sparking tools, aerospace bushings, and 190+ KSI conductive springs | Airborne beryllium dust/mist causes chronic beryllium disease; enforce wet flood coolant and OSHA capture rules |
| C706 & C715 (Copper-Nickel) | Seamless/welded marine pipe, tube, tube-sheet plate, and fittings | Shipboard seawater piping, condensers, offshore firewater systems, and desalination | 90/10 (C706) handles standard seawater at lower cost; 70/30 (C715) is reserved for high-velocity subsea/Naval specs |
What to Specify on a Copper RFQ
Include these details on line 1 of your quote request so distributors price the same spec and surface finish.
Edge profile and plating on C110 electrical bus bar
ASTM B187 electrical bus bar is produced with full-rounded edges, radiused corners, or sheared/sawed square edges (and sometimes pre-tin or silver plated). Calling out 'B187 full-rounded edge H02/H04' avoids hand-deburring sharp sheared edges that cause corona discharge.
Temper for machining vs bending
Soft-annealed copper smears onto cutters like putty. Request H02 (half-hard) or H04 (hard) bar for CNC milling and turning, and verify minimum bend-radius tables before forming thick H04 bus bar across the grain.
ASTM B152 / B187 vs ASTM F68 on C10100 OFE
True electronic-grade C10100 for vacuum brazing often requires ASTM F68 certification (including grain-size and hydrogen-embrittlement cup tests). Confirm F68 paperwork before ordering.
Lock price at order placement
Many copper distributors quote 'COMEX date of shipment' or expire quotes at 5 PM the same day during volatile sessions. Confirm whether the quoted per-pound price is firm at PO acceptance.
Frequently Asked Questions: Buying Copper
- When can C145 tellurium copper replace C110 pure copper?
- Whenever the part requires heavy turning, deep drilling, or single-point/tapped threads and can tolerate 93% IACS electrical conductivity instead of 100 – 101% IACS. Shops routinely cut total part cost by 30~50% on turned connectors by getting engineering sign-off for C145.
- What does '16 oz' or '20 oz' copper sheet mean?
- Architectural/roofing copper (ASTM B370) is sized by weight in ounces per square foot rather than gauge: 16 oz copper is ~0.0216 in thick and 20 oz is ~0.0270 in thick, whereas industrial C110 sheet/plate is sold by decimal inch thickness.
- How should a machine shop handle C172 beryllium copper safely?
- Review OSHA 1910.1024 and the supplier's SDS before cutting: avoid dry grinding, sanding, or EDM mist escape; flood-cool chip-making operations with mist collection; keep beryllium swarf segregated; and launder contaminated workwear per regulatory rules.
Already have a supplier quote in hand? Check if the price is fair.