Steel 1008 Rectangular Tube Prices
Current 1008 Steel Rectangular Tube prices by dimension, with $/lb for cross-size comparison.
1008/1010 Rectangular Tube currently ranges from $1.44/lb to $1.66/lb, flat 0.0% over the last 7 days.
About 1008|Very low carbon steel (0.08%), almost exclusively a sheet, strip, and wire product. Extremely formable and ductile. Meant for deep drawing, stamping, and cold heading, not machining. If it ends up in your lathe, expect gummy, stringy chips and poor surface finish. The material deforms instead of shearing cleanly. Used for sheet metal enclosures, cold-headed fasteners, wire products, and any stamped part where formability is the priority. Compare to 1010 (slightly more carbon, similar applications), 1018 (actual machining stock), and CS-B (similar softness without defined chemistry).
About Rectangular Tube|A hollow structural section used for frames, machine guards, and fabricated assemblies where you need different dimensions on each axis. Same fabrication use case as square tube with more flexibility in cross-section.
Raw Material Market Prices
1.0%30d
Steel HRC
$1,204/short ton
$0.60/lb
Hot Rolled Coil (HRC) is the benchmark for raw steel prices.
Width
Height
Wall
Width | Height | Wall | $/lb | $/ft | 7d |
|---|---|---|---|---|---|
| 1/2" | 1" | 0.065" | $1.52 | $0.92 | 0.0% |
| 3/4" | 1-1/2" | 0.065" | $1.47 | $1.38 | 0.0% |
| 3/4" | 1-1/2" | 0.083" | $1.55 | $1.82 | 0.0% |
| 1" | 2" | 0.09" | $1.66 | $2.85 | 0.0% |
| 1" | 2-1/2" | 0.083" | $1.63 | $3.07 | 0.0% |
| 1" | 3" | 0.065" | $1.54 | $2.63 | 0.0% |
| 1-1/4" | 2-1/2" | 0.083" | $1.56 | $3.16 | 0.0% |
| 1-1/2" | 2" | 0.065" | $1.56 | $2.15 | 0.0% |
| 1-1/2" | 2" | 0.083" | $1.44 | $2.67 | 0.0% |
| 1-1/2" | 2-1/2" | 0.083" | $1.52 | $3.29 | 0.0% |
| 1-1/2" | 3" | 0.083" | $1.44 | $3.52 | 0.0% |
| 2" | 3" | 0.083" | $1.52 | $4.15 | 0.0% |
12 items
Prices last updated August 2026
Get pricing analysis in your inbox
The Material Report, twice a month.