The Material Report #021
This fortnight in 30 seconds
| What you buy | Direction | What I'd do |
|---|---|---|
| Carbide tooling | Tungsten eased; Kennametal holds surcharges | Budget today's quotes into Q1; split surcharges |
| Steel plate | Nucor seeks +$70/ton; Nov 27 cutoff | Ask your supplier's pre-Thanksgiving deadline |
| Steel sheet | Nucor coil $1,310/ton; Jan/Feb mill waits | Confirm stock or ship date; shorten quote validity |
| Steel bar | Tracked round bar lists up 4~7% | Confirm quotes; ship needed SBQ before Jan 1 |
| Stainless 304/316 | Early-Nov nickel +7.2%; bar/sheet flat | Put the surcharge month on December POs |
| Aluminum 6061 | Bar down 13 cents/lb; plate up 92 cents | Refresh bar quotes; confirm honored plate quotes |
| Copper / brass | LME copper 4-month low; C360 down 5.5 cents | Get fresh C360 and C110 quotes for firm work |
Tungsten dipped, but Kennametal is keeping its tool prices and surcharges
Don't budget a tungsten discount on carbide inserts or solid end mills this quarter. Keep job estimates at today's quotes into early 2027, and separate base prices from tungsten and tariff surcharges before renewing a blanket order. Tungsten eased in September and October, yet Kennametal's November 4 report, flagged in #020, matched Sandvik's October stance: prices and surcharges stay up.
Kennametal's July-to-September filing shows how much of your bill is price and surcharges. Metal Cutting sales (turning, milling, and drilling) rose 28% year over year to $398 million, or 29% organically before workday shifts. Management put volume growth in the mid-single digits, so price and surcharges drove most of that 29% gain.
Management's outlook keeps those increases in place. Finance chief Patrick Watson guided net price and tariff surcharges up 47~50% year over year for October to December, and 40~43% for the fiscal year ending in June. That is company-wide guidance, not fact, blending Metal Cutting with Infrastructure, where powders and wear parts rose 98% (97% organically). Inserts aren't jumping another 50%; Kennametal expects to hold prior hikes if tungsten stays near Watson's "$2.7 thousand level."
Don't read lower Chinese tungsten quotes as US relief. Western toolmakers price off ammonium paratungstate (APT, a tungsten chemical) outside China. Export controls split the market. In August context, Argus Media put European APT at $2,780 to $3,100 per metric ton unit, nearly triple China's price. Tungsten remains eightfold above September 2023.
High-cost stock also blocks base cuts. Inventories jumped $508 million in a quarter to $1.62 billion September 30, tripling in 18 months and pushing operating cash flow to negative $201 million. Watson said autumn's dip won't unwind that outlay soon. As peak-cost tungsten works through stock, management expects a margin headwind January to June.
Tariffs add a second floor. The Supreme Court struck down IEEPA tariffs in February. From July 24, the administration's trade office imposed 10% and 12.5% Section 301 duties across 60 partners, with exemptions and base-duty caps. Watson said that wider base pushed Metal Cutting's tariff bill ~30% above its IEEPA run rate, offset via cost cuts or surcharges. Check your brand on refunds: Sandvik (#020) plans customer credits, while Kennametal's filing expects to reinvest refunds, with no customer obligation as of September 30.
Don't misread chief executive Sanjay Chowbey's remark on "selectively pricing to win targeted applications." That covered Infrastructure wear parts, where volume fell, not Metal Cutting inserts. Lower-tungsten tool redesigns mostly lie ahead. Ask when each surcharge updates, quote your top five inserts against a rival, and ask in writing about Sandvik credits. Also check carbide scrap buybacks: an August 27 Commerce rule keeps US tungsten scrap sales domestic.
From our benchmark
| Product | Median list change | Products |
|---|---|---|
| 1018 steel round bar | +$0.055/lb, +4.2% | 109 |
| 1045 steel round bar | +$0.055/lb, +4.1% | 102 |
| 4140 steel round bar | +$0.12/lb, +4.4% | 88 |
| 4150 steel round bar | +$0.175/lb, +7.1% | 24 |
| All tracked steel forms | +$0.05/lb, +2.7% | 2,003 |
| 6061 aluminum bar | -$0.13/lb, -2.8% | 240 |
| 6061 aluminum plate | +$0.92/lb, +14.8% | 25 |
These are list prices from one national distributor, Southern California basis. We compare complete-week medians for the same products and tiers: October 26 to November 1 versus November 9 to 15.
Steel round bar rose from #020's flat reading via steps October 29, November 2, and November 10. CS-B hot-rolled sheet added $0.02/lb (+2.1%) and A500 tube held flat. Preliminary November 16 steel checks edged up $0.03/lb and reversed a two-day A516 Grade 70 plate dip. Extruded 6061 and 6063 aluminum shapes fell November 3 after 6061-T651 plate jumped November 2, and both held November 16.
Pricing notes
Steel plate and sheet: Steel Market Update (SMU) reported November 13 that Nucor seeks $70 a short ton more (3.5 cents/lb) on December plate. SMU's November 10 averages hit $1,550 a ton on plate (up $55) and $1,375 on hot-rolled coil, highest since May 2022. Nucor raised posted spot coil to $1,295 November 9 and $1,310 November 16 ($30 above #020, after our Sunday cutoff). Confirm honored quotes in writing and bid new work at replacement cost.
Steel bar: World Steel Dynamics reported November 13 that Nucor and Gerdau raised merchant bar $40 to $60 a ton (2 to 3 cents/lb) November 6 to 9. November scrap rose $20 to $30 a gross ton (~0.9 to 1.3 cents/lb), per SMU. Gerdau Special Steel announced November 2 a $60-a-ton (3 cents/lb) special bar quality (SBQ) hike for shipments from January 1. Confirm open quotes and schedule needed SBQ to ship before January 1.
Stainless: Shanghai Metals Market reported November 6 that London Metal Exchange (LME) three-month nickel rose $1,095 (7.2%) to $16,315 a tonne November 5 on 2027 Indonesian quota talk. One week won't set monthly surcharges. North American Stainless held November's fuel fee at 58%, with no December alloy post through November 16. Tracked 304 and 316 bar and sheet held flat overall (316 bar dipped 6 cents/lb), while 304 square tube rose 15 cents/lb. Put the surcharge month on December POs and confirm 304 tube quotes.
Aluminum: LME three-month aluminum touched a three-week low of $2,988 a tonne November 10, per Reuters. Tight stocks still kept November 13's cash offer at $3,150.50 versus $3,018 for three-month delivery, per AlCircle. Prompt metal costs extra atop the US Midwest premium, which regulators ordered reviewed November 13 without a timetable. Benchmark 6061 bar fell, sheet barely moved, and 6061 plate erased #019's drop without a verified mill notice. Refresh bar quotes for firm work, confirm honored plate quotes, and check a second supplier if plate jumped.
Copper and brass: Reuters reported November 13 that LME three-month copper fell to $13,371.50 a tonne after touching $13,358, lowest since July 17. Over our benchmark weeks, C360 brass dipped 5.5 cents/lb and C110 copper dipped 2.5 cents/lb; bronze is too thin to support a call, so no call. Futures and stock cover different windows and products. Covered imported shaped copper carries 25% or 50% Section 232 duties by code (10% at 85%+ US-smelted/cast content), while raw cathode feedstock had no January 1 tariff proclamation through November 16. Request fresh C360 and C110 quotes before budgeting savings.
Diesel and freight: EIA's November 9 survey put US diesel at $6.127 a gallon, down 16.5 cents from November 2 and 22.5 cents below #020. Verify which survey week sets your delivery surcharge.
Beyond prices
-
Steel mill cutoffs and waits, November 12 to 16: SMU put sheet and plate mill waits in late January 2027 (some mid- to late February) as buyers order competitive imports. Nucor's November 27 December plate cutoff is the day after Thanksgiving, so distributors close lists earlier. Ask your supplier's deadline this week and check import dates if foreign melt is allowed.
-
Steel labor, November 6: Cleveland-Cliffs and the Steelworkers reached tentative four-year deals for ~12,000 workers in five states, pending ratification. US Steel talks continue separately. The tentative pact lowers the Cliffs sheet risk flagged in #018 and #019; keep checking backup supply on US Steel-backed orders.
-
Financing and rate odds, November 6 and 10: October payrolls rose 165,000 (manufacturing +19,000) and consumer prices rose 0.4% from September (core +0.3% versus 0.2% forecast), per the Bureau of Labor Statistics and InvestmentNews. Futures November 10 priced ~85% odds of a quarter-point Fed hike and ~15% odds of a half-point hike December 8 to 9 above today's 3.75~4% range. Lock fixed-rate machine quotes before December 8 and include higher interest in Q1 buy-aheads.
-
Machine tool deliveries, November 9: US metalworking machinery orders topped $1 billion in September, a monthly record, per AMT and DC Velocity. Orders rose 38% from August and 101.7% year over year after IMTS 2026. Get build and delivery dates in writing before placing a deposit.
What I'm watching next
-
November 30: S&P Global Platts starts CIF US ports tungsten concentrate and APT assessments for non-Chinese supply. Watch whether toolmakers tie 2027 surcharges to a US-delivered index.
-
Late November: December alloy and fuel surcharges from North American Stainless and Outokumpu. Check whether early-November's nickel jump lifts December 304 and 316 surcharges before signing year-end POs.
-
December 8 to 9: The Fed's policy decision. Lock fixed-rate equipment financing and recheck carrying costs on Q1 buy-aheads beforehand.
Buying metal for an upcoming job, or stuck on an urgent, hard-to-find item? Hand off your material list and I'll get quotes from multiple suppliers, comparing price and lead time on one page with no markup. First full round is free on a real order.
Eric Na writes The Material Report, a bi-weekly newsletter on metal pricing trends for machinists and shop owners.
Get the next Material Report in your inbox
Twice-monthly benchmarks, trend analysis, and market context written for shops and small buyers.
Sources
- Kennametal Inc., "Form 10-Q for the quarterly period ended September 30, 2026" (November 4, 2026)
- Kennametal Inc., "Kennametal Announces Fiscal 2027 First Quarter Results" (Form 8-K, Exhibit 99.1) (November 4, 2026)
- The Motley Fool via AOL, "Kennametal (KMT) Q1 2027 Earnings Call Transcript" (November 4, 2026)
- Argus Media, "W prices soften but EU already hit by cost surge" (August 20, 2026)
- Office of the US Trade Representative, "Fact Sheet: USTR Section 301 Action in Response to the Failure of 60 Economies to Ban Imports Produced with Forced Labor" (July 23, 2026)
- Office of the US Trade Representative, "Notice of Actions in Section 301 Investigations of Acts, Policies, and Practices of Various Economies Related to the Failure of Each Economy to Impose and Effectively Enforce a Prohibition on the Importation of Goods Produced with Forced Labor" (July 23, 2026; effective July 24, 2026)
- Bureau of Industry and Security, Department of Commerce, "DPAS Directive Allocation Order and Additional Requirements for Recoverable Critical Minerals and Materials" (FR Doc. 2026-16078) (August 6, 2026; effective August 27, 2026)
- United States Cutting Tool Institute, "Overview of Tariff and Trade Restriction Advocacy Efforts" (August 27, 2026 tungsten scrap export rule)
- S&P Global Platts, "Platts to launch new alternative supply chain tungsten price assessments" (October 26, 2026; effective November 30, 2026)
- Steel Market Update, "Nucor aims to raise plate prices by $70/ton, opens December orderbook" (November 13, 2026)
- Steel Market Update, "SMU Price Ranges rise on tight supply, no signs of a year-end slowdown" (November 10, 2026)
- Steel Market Update, "Nucor ups spot HR coil to $1,295/ton" (November 9, 2026)
- Steel Market Update, "Nucor again raises spot HR coil by $15/ton" (November 16, 2026)
- Steel Market Update, "Lead times extend deeper into 2027, some see no availability until late Feb" (November 12, 2026)
- Steel Market Update, "SMU Survey: Steel buyers turn to imports as lead times stretch and prices rise" (November 16, 2026)
- World Steel Dynamics, "Long Product Price Hikes Likely to Stick in US Market" (November 13, 2026)
- Steel Market Update, "November scrap prices rise as market nears settle" (November 6, 2026)
- Gerdau Special Steel North America, "SBQ Price Announcement" (November 2, 2026; effective January 1, 2027)
- Steel Market Update, "Gerdau hikes SBQ prices by $60/ton" (November 3, 2026)
- Shanghai Metals Market, "Multiple Factors Drive SHFE Nickel Up 4.7% This Week, Jinchuan Nickel Premium Pulls Back" (November 6, 2026)
- North American Stainless, "Fuel Surcharge" (October 27, 2026)
- Reuters via Mining.com, "Firmer dollar, Middle East de-escalation hopes push aluminum price to three-week low" (November 10, 2026)
- AlCircle, "LME aluminium cash bid slips $3,150 as cancelled warrants jump 21.42%" (November 16, 2026; November 13 session)
- Reuters via Mining.com, "CFTC plans to overhaul aluminum pricing in US" (November 13, 2026)
- Reuters via Mining.com, "Copper price heads for biggest weekly drop since March on AI rout" (November 13, 2026)
- White House, "Adjusting Imports of Copper into the United States" (July 30, 2025)
- White House, "Strengthening Actions Taken to Adjust Imports of Aluminum, Steel, and Copper Into the United States" (April 2, 2026; effective April 6, 2026)
- White House, "Further Adjusting the Tariff Regimes for Imports of Aluminum, Steel, and Copper into the United States" (June 1, 2026; effective June 8, 2026)
- EIA, "Gasoline and Diesel Fuel Update" (November 10, 2026 release; November 9 survey)
- Cleveland-Cliffs Inc., "Cleveland-Cliffs Reaches New Four-Year Labor Agreements with United Steelworkers" (November 6, 2026)
- Steel Market Update, "Cliffs, USW reach tentative four-year labor deal" (November 6, 2026)
- Bureau of Labor Statistics, "The Employment Situation - October 2026" (November 6, 2026)
- Bureau of Labor Statistics, "Consumer Price Index - October 2026" (November 10, 2026)
- InvestmentNews, "CPI comes in hot, raising odds of a bigger-than-expected December rate hike" (November 10, 2026)
- Federal Reserve, "Meeting calendars and information" (checked November 16, 2026)
- AMT, "IMTS Drives Manufacturing Technology Orders Past $1B in September 2026" (November 9, 2026)
- DC Velocity, "Machine tool demand hits record high" (November 9, 2026)
- Material Price Book, "The Material Report #020" (November 3, 2026)
- Material Price Book, "The Material Report #019" (October 20, 2026)
- Material Price Book, "The Material Report #018" (October 6, 2026)
- Material Price Book, "Benchmark Methodology" (complete weeks through November 15; preliminary check November 16, 2026)
- Material Price Book, "Price Movers" (November 2026)