Stainless Steel 17-4 Round Bar Prices
Current 17-4 Stainless Steel Round Bar prices by dimension, with $/lb for cross-size comparison.
17-4-Cold Finished Round Bar currently ranges from $4.56/lb to $4.69/lb, flat 0.0% over the last 7 days.
About 17-4|A precipitation-hardening martensitic stainless. In Condition A (annealed) it machines similarly to 304, but once aged to H900 it gets significantly harder and tougher on tools. Most shops machine it in Condition A then send it out for heat treat. It shrinks predictably during aging (roughly 0.0005 in/in), so leave allowance. Responds well to high-efficiency trochoidal toolpaths with low radial engagement and high axial depth. Use coated carbide, high-pressure coolant, and keep the chipload up to avoid work hardening. Used in aerospace, oil and gas valves, and anywhere you need 304-level corrosion resistance with much higher strength. Compare to 15-5 PH (similar but better transverse properties) and 304 (easier to machine but cannot be heat treated to anywhere near the same strength).
About Round Bar|The default starting stock for lathe work. It gets turned, bored, and parted into shafts, pins, bushings, spacers, and just about anything round.
Get pricing analysis in your inbox
The Material Report, twice a month.
Raw Material Market Prices
1.0%30d
Nickel
$7.72/lb
Nickel is a primary cost driver for stainless steel and superalloys.
Raw Material Market Prices
3.6%30d
Steel HRC
$1,074/short ton
$0.54/lb
Hot Rolled Coil (HRC) is the benchmark for raw steel prices.
Show additional sizes(2 products, retail pricing)
Diameter
Diameter | $/lb | $/ft | 7d |
|---|---|---|---|
| 2" | $4.69 | $50.09 | 0.0% |
| 3" | $4.69 | $112.74 | 0.0% |
| 3-1/4" | $4.69 | $132.31 | 0.0% |
| 3-1/2" | $4.56 | $149.16 | 0.0% |
4 items
Prices last updated March 2026